Samsung LN40C630 User Manual - Page 48

Other information Purpb/green rolling horizontal bars and buzzing noise from the %/speakers with Component cable connection, Tile picture will not display in full screen, The remote control does not work. Tile cabb/set top box remote control does not turn tile TV on or off, or adjust the volume, A "Mode Not Supported" message appears, Caption on TV merlu is greyed out, There is a plastic smell from the TV. 7R!Signal information is unavailabb in the Self Diagnosis 7]st menu. TV is tilted to right or Idt side. The Channel menu is grey out (unavailable). Your settings are lost alter 30 minutes or every time 7``,/is turned off. You have intermittent loss of audio or video. Tile PiP menu is not available, You see small particles when you look closely at the edge of the frame of the -P4 POP (-rv's internal banner ad) appears on the screen. • Remove the left and right audio connections from the set top-box. If the buzzing stops, this indicates that the sebtop-box has a grounding issue, Replace the Component video cables with an HDMI connection. • HD channeB will have black bars on either side d the screen when displaying upscabd SD (4:3) contents. ,, Black bars on Top & Bottom will be shown on movbs that have aspect ratios different from your 777. • Adjust picture size option on your external device or 7Wto full screen. • Replace the remote control batteries with correct polarity (+/-), ,, Clean the transmission window located on the top of the remote, ,, -Frypointing the remote directly at the TV from 5-_6 feet away, ,, Program the Cable/Sat renlote control to operate the TV. Refer to Cable/Sat user manual for SAMSUNG 7V code. ,, Check the supported resolution d the TV and adjust the external device's output resolution accordingly. Refer to resolution settings in this manual. ,, Caption can not be selected in the TV menu when connected via HDMI or Component. ,, Caption must be activated on the external device, ,, Thb snlell is normal and will dissipate over time. ,, Thb function is only available with digital channels from an Antenna / RFYCoaxconnection. (R 22) ,, Remove the stand base from TV and reassembb it. ,, The Channel merlu is only availabb when the TV source is selected, ,, If 7-',/is in the Store Demo mode, it will reset audio and picture settings every 30 mirlutes. Please change from Store Demo mode to Home Use mode in the Plug & Play procedure, Press the SOURCIE button to select TV mode, go to MIEI',SJ_ Setup _ Plug & Play ENTER _, ,, Check the cable connections and reconnect them. ,, Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. mounting the %/to the wall, we recommend using cables with 90 degree connectors. ,, PiP functionality is only availabb when you are using a HDMI, PC or components source. ,, Thb is part of the product's design and is not a defect, • Select Honle Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup), (R 7) This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce, However, there may be a few bright or dark pixels on the screen, These pixels will have no impact on the performance of the product, 8 English