Home » Samsung Manuals » Laser Printers » Samsung ML-2010 » Manual Viewer

Samsung ML-2010 User Manual (ENGLISH) - Page 57

Software User's Guide, Paper, Start, Settings, Printers, Properties, Details, Spool Settings - windows 7 driver

UPC - 635753622317

View all Samsung ML-2010 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Problem Possible Cause Solution The printer does not print. (continued) The printer driver may be incorrectly installed. Reinstall the printer driver; see Software User's Guide. Try printing a demo page. The printer is malfunctioning. Check the LEDs on the control panel to determine if the printer is indicating a system error. The machine selects print materials from the wrong paper source. The paper source selection in the printer properties may be incorrect. For many software applications, the paper source selection is found under the Paper tab within the printer properties. Select the correct paper source. For details, see Software User's Guide. Paper does not feed into the printer. Paper has not been loaded correctly. There is too much paper in the tray. Remove paper from the tray and reload it correctly. Remove excess paper from the tray. The paper is too thick. Use only paper that meets the specifications required by the printer. Print job is extremely slow. The job may be very complex. Reduce the complexity of the page or try adjusting the print quality settings. The maximum print speed of the printer is 20(A4) or 22(Letter) pages per minute. If using Windows 98/ Me, the Spooling Setting may be set incorrectly. From the Start menu, choose Settings and Printers. Right-click the your printer icon, choose Properties, click the Details tab, and then choose the Spool Settings button. Select the desired spool setting. Half the page is blank. The page layout is too Simplify the page layout and remove any complex. unnecessary graphics from the document. The page orientation setting may be incorrect. Change the page orientation in your application. The paper size and the paper size settings do not match. Ensure that the paper size in the print settings matches the paper in the tray. 5.4 SOLVING PROBLEMS

Section	Page
User's Guide	1
Contents	5
1 Introduction	14
Special Features	15
Printer Driver Features	16
Printer Components	17
Front View	17
Rear View	18
Understanding the Control Panel	19
On Line/Error and Toner Save LEDs	19
Cancel button	20
2 Setting Up Your Printer	21
Unpacking	22
Selecting a Location	23
Installing the Toner Cartridge	24
Loading Paper	27
Connecting a Printer Cable	29
Turning the Printer on	30
Printing a Demo Page	31
Installing Printer Software	32
System Requirements	33
3 Using Print Materials	34
Choosing Paper and Other Materials	35
Type, Input Sources and Capacities	36
Guidelines for Paper and Special Materials	36
Verifying the Output Location	39
Loading Paper	39
Using the Tray	39
Using the Manual Tray	40
Printing on Special Materials	41
Canceling a Print Job	43
4 Maintaining Your Printer	45
Maintaining the Toner Cartridge	46
Redistributing Toner	47
Replacing the Toner Cartridge	49
Using the Toner Save Mode	49
Cleaning the Printer	50
Cleaning the Outside	50
Cleaning the Inside	50
Consumables and Replacement Parts	53
5 Solving Problems	54
Troubleshooting Checklist	55
Solving General Printing Problems	56
Clearing Paper Jams	59
In the Paper Exit Area	59
In the Paper Feed Area	61
In the Manual Tray	62
Around the Toner Cartridge	62
Tips for Avoiding Paper Jams	63
Solving Print Quality Problems	64
Print Quality Checklist	64
Solving Print Quality Problems	65
Troubleshooting Error Messages	70
Common Windows Problems	71
Common Macintosh Problems	71
Common Linux Problems	72
6 Specifications	76
Printer Specifications	77
Paper Specifications	78
Overview	78
Supported Sizes of Paper	79
Guidelines for Using Paper	80
Paper Specifications	81
Paper Output Capacity	81
Printer and Paper Storage Environment	82
Index	83
C	83
D	83
E	83
I	83
L	83
M	83
O	83
P	83
Q	83
S	83
T	83
U	84
Software User’s Guide	85
Contents	86
1 Installing Printer Software in Windows	88
Installing Printer Software	88
Changing the Software Language	89
Reinstalling Printer Software	90
Removing Printer Software	90
2 Basic Printing	91
Printing a Document	91
Printer Settings	92
Layout Tab	92
Paper Tab	93
Graphics Tab	94
Extras Tab	95
About Tab	95
Printer Tab	95
Using a Favorite Setting	96
Using Help	96
3 Advanced Printing	97
Printing Multiple Pages on One Sheet of Paper (N-Up Printing)	97
Printing Posters	98
Printing Booklets	98
Printing on Both Sides of Paper (Manual Duplex)	99
Printing a Reduced or Enlarged Document	100
Fitting Your Document to a Selected Paper Size	100
Using Watermarks	101
Using an Existing Watermark	101
Creating a Watermark	101
Editing a Watermark	102
Deleting a Watermark	102
Using Overlays	102
What is an Overlay?	102
Creating a New Page Overlay	102
Using a Page Overlay	103
Deleting a Page Overlay	104
4 Sharing the Printer Locally	105
Setting Up a Host Computer	105
Setting Up a Client Computer	105
5 Using Status Monitor	106
Opening the Troubleshooting Guide	106
Changing the Status Monitor Program Settings	106
6 Using Your Printer in Linux	107
System Requirements	107
Installing the Printer Driver	108
Changing the Printer Connection Method	109
Uninstalling the Printer Driver	110
Using the Configuration Tool	110
Changing LLPR Properties	111
7 Using Your Printer with a Macintosh	112
Installing Software for Macintosh	112
Setting Up the Printer	113
For a Network-connected Macintosh	113
For a USB-connected Macintosh	113
Printing	113
Printing a Document	113
Changing Printer Settings	114
Printing Multiple Pages on One Sheet of Paper	115
Index	116
A	116
B	116
D	116
E	116
F	116
G	116
H	116
I	116
L	116
M	116
N	116
O	116
P	116
S	116
T	117
U	117

Match case Limit results 1 per page

OLVING

ROBLEMS

Problem

Possible Cause

Solution

The printer

does not print.

(continued)

The printer driver may

be incorrectly

installed.

Reinstall the printer driver; see

Software User’s Guide

. Try printing a

demo page.

The printer is

malfunctioning.

Check the LEDs on the control panel to

determine if the printer is indicating a

system error.

The machine

selects print

materials from

the wrong paper

source.

The paper source

selection in the printer

properties may be

incorrect.

For many software applications, the paper

source selection is found under the

Paper

tab within the printer properties. Select the

correct paper source. For details, see

Software User’s Guide

Paper does not

feed into the

printer.

Paper has not been

loaded correctly.

Remove paper from the tray and reload it

correctly.

There is too much

paper in the tray.

Remove excess paper from the tray.

The paper is too thick.

Use only paper that meets the

specifications required by the printer.

Print job is

extremely

slow.

The job may be very

complex.

Reduce the complexity of the page or try

adjusting the print quality settings.

The maximum print speed of the printer

is 20(A4) or 22(Letter) pages per minute.

If using Windows 98/

Me, the Spooling

Setting may be set

incorrectly.

From the

Start

menu, choose

Settings

and

Printers

. Right-click the

your

printer icon, choose

Properties

, click

the

Details

tab, and then choose the

Spool Settings

button. Select the

desired spool setting.

Half the page

is blank.

The page layout is too

complex.

Simplify the page layout and remove any

unnecessary graphics from the document.

The page orientation

setting may be

incorrect.

Change the page orientation in your

application.

The paper size and

the paper size settings

do not match.

Ensure that the paper size in the print

settings matches the paper in the tray.