Samsung NX58F5500SS/AA User Manual - Page 52

Stainless steel surfaces, maintaining your appliance

Get Samsung NX58F5500SS/AA PDF manuals and user guides View all Samsung NX58F5500SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Stainless steel surfaces Do not use a steel-wool pad or abrasive cleaners on stainless steel surfaces. WARNING Abrasive pads and cleaners will scratch the surface and damage the surface finish. To prevent any discolorations and/or grease stains, we recommend cleaning and removing any spills, spots, and grease from the range after each use. 1. Wipe off any spills with a damp, soft cloth. 2. Apply an approved stainless steel cleaner to a damp, clean cloth or paper towel. Clean a small area carefully following the instructions on the cleaner. Stainless steel should always be cleaned with the grain in the stainless steel, if applicable. 3. Dry and buff with a clean, dry, soft cloth. 4. Repeat steps 2 and 3 as necessary. Stainless steel surfaces Do not spray any type of cleaner into the manifold panel holes. Within these WARNING holes are ignition switches which carry the current that lights the surface burners. Spraying into them could damage the range. 52_ maintaining your appliance NX58F5300SS_AA_DG68-00509A-04_EN+MES.indb 52 3/30/2016 3:37:45 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
52
_ maintaining your appliance
Stainless steel surfaces
Do not use a steel-wool pad or abrasive cleaners on stainless steel surfaces.
Abrasive pads and cleaners will scratch the surface and damage the surface
finish.
To prevent any discolorations
and/or grease stains, we
recommend cleaning and
removing any spills, spots, and
grease from the range after each
use.
1.
Wipe off any spills with a damp,
soft cloth.
2.
Apply an approved stainless steel
cleaner to a damp, clean cloth or
paper towel. Clean a small area
carefully following the instructions
on the cleaner. Stainless steel
should always be cleaned with
the grain in the stainless steel, if
applicable.
3.
Dry and buff with a clean, dry, soft
cloth.
4.
Repeat steps 2 and 3 as necessary.
Do not spray any type of cleaner into the manifold panel holes. Within these
holes are ignition switches which carry the current that lights the surface
burners. Spraying into them could damage the range.
WARNING
WARNING
Stainless steel
surfaces
NX58F5300SS_AA_DG68-00509A-04_EN+MES.indb
52
3/30/2016
3:37:45 PM