Samsung NX58F5500SS/AA User Manual - Page 68
PROBLEM, POSSIBLE CAUSE, SOLUTION, Gas Pressure Regulator shut off
View all Samsung NX58F5500SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
PROBLEM Surface burners do not light. Surface burner clicks during operation. The burners do not burn evenly. Very large or yellow surface burner flames. Surface burners light but oven burners do not light. Display goes blank. Very large or yellow oven burner flames. Food does not bake or roast properly in the oven. POSSIBLE CAUSE SOLUTION The control knob is not set properly. Push in the control knob and turn it to the LITE position. The burner caps are not in place. Clean the electrodes. The burner base is misaligned. Put the burner cap on the burner head. Align the burner base. The control knob has been left in the LITE position. After the burner lights, turn the control knob to a desired setting. If the burner still clicks, contact a service technician. Surface burner components and See page 55. caps are not assembled correctly and level. Surface burners are dirty. Clean surface burner components. (See pages 55 and 56.) Wrong orifice is assembled. Contact your installer. Check the burner orifice size and contact your installer if you have the wrong orifice. Check the LP gas conversion. The oven door lock is turned on. The display will show the Lock icon. Hold the oven door open and press the START/SET pad for 3 seconds. The oven will beep and the Lock icon will turn off. Gas Pressure Regulator shut off Call a qualified service switch is in the 'off position. technician. The electrical outlet Ground Fault Interrupter (GFI or GFCI) has been tripped and needs to be reset. Your digital control has been damaged. Replace fuse or reset circuit breaker. The oven burner air adjustment Call for a qualified service shutters need to be adjusted. technician. Gas supply is not properly connected or turned on. See the Installation Instructions that came with your range. Wrong cooking mode is selected. See pages 27-28, 41. The oven racks have not been See page 30. positioned properly for the foods being cooked. Incorrect cookware or cookware See page 24. of improper size being used. Oven thermostat needs adjustment. See page 35. There is aluminum foil on racks and/or oven bottom. Remove foil. Clock or timers not set correctly. See pages 30 and 31. 68_ troubleshooting NX58F5300SS_AA_DG68-00509A-04_EN+MES.indb 68 3/30/2016 3:37:50 PM