Samsung SCC-B5399H User Manual - Page 22

How to use OSD Menu • NIGHT Use the NIGHT mode if you want to set the white balance differently according to the ambient luminance. the ambient conditions. The color temperature ranges from approx. 2500K to 9300K. • ATW2: The color temperature ranges from approx. 2,000K to 10,000K. If the NIGHT mode is set to OFF, the white • AWC ( Auto White Balance Control): If you balance will always operate as set in DAY mode; press the SETUP switch in the appropriate item if not to OFF, the camera will switch to as set in position, Auto White Balance will perform once. DAY/NIGHT mode according to the brightness. • 3200K : Set color temperature to 3200K In NIGHT mode, you can set the values of RED, • 5600K : Set color temperature to 5600K BLUE and BRIGHTNESS. The screen will be displayed in colors according to your settings. - RED : Adjusts the strength of the red color. - L - BLUE : Adjusts the strength of the blue color. c WHITE BAL - R-GAIN/B-GAIN : Enables you to set the current r DAY/NIGHT NIGHT color temperature manually. e BRIGHTNESS MODE RED MID AWC [00]----I---- - BRIGHTNESS : Select a brightness level in switching from setting in DAY mode to setting in  BLUE [00]----I---- NIGHT mode. R-GAIN B-GAIN [0248] [0247] ❖ DIGITAL ZOOM [ON/OFF] You can set the digital zoom factor and position. If you press the SETUP switch with the DIGITAL ❖ ZOOM function set to ON, you will see the  Note : appropriate screen. - You can set the values of R-GAIN and B-GAIN only in When the zoom factor and position are defined, ❖ AWC mode. the digital zoom function will operate. - If AGC is set to OFF or FIX, you can not access the NIGHT menu. - For adjusting the white balance, the following 5 modes are provided: • ATW1(Auto Tracing White Balance mode 1): The camera can automatically adjust the color temperature in real time, according to 22 - DIGITAL COLOR DOME CAMERA