Samsung SCC-B5399H User Manual - Page 23

ENG How to use OSD Menu e DIGITAL ZOOM  Note : RATIO < LOCATION > [X1.0] - Use of DC 12V will fix V-SYNC to INT, which can not be changed. ❖ AGC COLOR SUP [LOW , MID, HIGH] Adjust the color scheme according to the AGC value. m e. ❖ REVERSE [OFF, H, V, H/V] Mirrors video signals horizontally, vertically, or both. ❖ POSI/NEGA [+, -] - LOCATION : If you press the SETUP switch in the Output as it is or mirror the video brightness signal. condition where the image is enlarged as much as the t ratio setting, you can watch an invisible area of the effective screen as well using the cdef switch. ❖ PIP [OFF, ON] Displays a sub image together with the main image on the same screen using the Picture In Picture function.  Note : - If the digital zoom factor is set to larger than 1x, the FENCE function will be deactivated. The DIGITAL ZOOM function enlarges the pixel itself, which can  Note : - If more than one privacy zone is set and the PRIVACY SET is set to ON, the PIP function will be deactivated. cause deterioration of the quality. - If the INTELLIGENCE function is set to FENCE mode, the PIP . menu will be deactivated. L ❖ DETAIL [0~3] Controls the horizontal or vertical distinction. ❖ DIS [OFF, ON] Digital Image Stabilization will set the anti-shake ❖ V-SYNC [INT, LINE] compensation. Select the vertical sync mode for INT or LINE. If you select INT, the camera will use the internal synchronization.  Note : - If you set DIS to ON, the compensation area will be enlarged as set in the digital zoom factor. If selecting LINE, the camera will use the external If you set the digital zoom factor to greater than the enlarged power source frequency for the synchronization. zoom factor for the compensation, the DIS function will be You can adjust the LL-PHASE. deactivated. English - 23