Samsung SCD180 User Manual (user Manual) (ver.1.0) (English) - Page 26
Using the Lithium Ion Battery Pack
View all Samsung SCD180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
ENGLISH Preparation Using the Lithium Ion Battery Pack 1 The amount of continuous recording time available depends on : - The type and capacity of the battery pack you are using. - How often the Zoom function is used. It is recommended that you have several batteries available. Charging the Lithium Ion Battery Pack 1. Attach the battery pack to the camcorder. 4 2. Connect the AC Power adapter to an AC cord and connect the AC cord to a wall socket. 3. Connect the DC cable to the DC jack socket on the camcorder. 1 4. Turn the Camera power switch to off, and the charging 2 indicator will start to flash showing that the battery is charging. 3 Blinking time Charging rate Once per second Less than 50% Twice per second Three times per second Blinking stops and stays on 50% ~ 75% 75% ~ 90% 90 ~ 100% On for a second and off for a second Error - Reset the battery and the DC cable 5. When the battery is fully charged, disconnect the battery and the AC Power adapter from the camcorder. s Even with the power switched off, the battery will still discharge if it is left connected to the camcorder. Notes s The battery pack may be charged a little at the time of purchase. s To prevent reduction in the life and capacity of the battery pack, always remove it from the camcorder after it is fully charged. 22