Samsung SCD180 User Manual (user Manual) (ver.1.0) (English) - Page 94
Maintenance
View all Samsung SCD180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
ENGLISH Maintenance After finishing a recording 1 At the end of a recording, you must remove the power source. 1 When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery. Hence, it should be removed. After completing a recording session 1. Slide the TAPE EJECT switch in the direction of the arrow. s Opening the cassette door ejects the tape automatically. s Please wait while the tape is completely ejected. 2. After removing the tape, close the door and store the camcorder in a dust free environment. s Dust and other foreign materials can cause square-shaped noise or jerky images. 3. Set the power switch to the OFF mode. 1 2 REV S.SHOW FWD DELETE 3 4 MEM OFF MEM/P 4. Disconnect the power source or remove the Lithium Ion Battery Pack. s When disconnecting a power supply, remove it in reverse order, by referring to page 21. s Hold down the BATTERY RELEASE button and slide the battery pack in the direction of the arrow. 90