Samsung SCX-3405W User Manual (user Manual) (ver.1.0) (English) - Page 206

System setup Item Job Timeout Wakeup Event Auto Continue • Altitude Adj. • Altitude Adjustment Description Sets the length of time the printer waits before printing the last page of a print job that does not end with a command to print the page. You can set the condition to wake up from power-save mode. Set the item on. • Button Press: When you press any button except power button, the machine wake up from the power save mode. • Scanner: When you insert paper in the document feeder, the machine wake up from the power save mode. • Printer: When you open or close the paper tray, the machine wake up from the power save mode. Determine whether or not the machine continues printing when it detects the paper does not match the paper settings. • Off: If a paper mismatch occurs, the machine waits until you insert the correct paper. • On: If a paper mismatch occurs, an error message will display. The machine waits for about 30 second, then automatically clear the message and continue printing. Optimize print quality according to the machine's altitude. Item Description Auto CR Allows you to append the required carriage return to each line feed, which is useful for Unix or DOS users. Firmware Version Shows the product's firmware version. AutoComplete Provides suggestions while you type an email address or fax number. This enables you to find and select the data without typing it in completely. • Tray Chaining Determine whether or not the machine continues • Auto Tray Switch printing when it detects the paper does not match. For example, if both tray 1 and tray 2 are filled with the same size paper, the machine automatically prints from tray 2 after the tray 1 runs out of paper. This option does not appear if you selected Auto for Paper Source from printer driver. Paper Substit. Paper Substitution Automatically substitutes the printer driver's paper size to prevent the paper mismatch between Letter and A4. For example, if you have A4 paper in the tray but you set the paper size to Letter in the printer driver, the machine prints on A4 paper and vice versa. Paper Mismatch Determine whether to disregard the paper mismatch error or not. Select Off, then the machine does not stop printing even if the paper mismatches. 3. Useful Setting Menus 206