Home » Samsung Manuals » Mobile Phones » Samsung SGH-C225 » Manual Viewer

Samsung SGH-C225 User Manual (user Manual) (ver.f2) (English) - Page 23

Locking or Unlocking the keypad

Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Note: The display language is factory set to English. To change the language, use the Language menu option (Menu 5.4); for further details, refer to "Language" on page 83. If you locked the keypad, you must unlock it before switching the phone off by pressing the Unlock soft key and the key. 4. When you wish to switch the phone off, hold down the key until the power-off image is displayed. Note: If you locked the keypad, you must unlock it before switching the phone off by pressing the Unlock soft key and the key. Locking or Unlocking the keypad You can lock the keypad to avoid pressing keys by mistake. In Idle Mode, press and hold the key until the LOCK icon and "Keypad Locked" appear on the display. You can answer incoming calls using any keys, even if you lock the keypad. When you receive a call in the key lock mode, the keypad is automatically unlocked. After the call, the key lock mode is canceled. You can dial emergency calls even if you lock the keypad. When the confirming message appears, select Yes by pressing the left soft key or the Green phone key. When you end the call, your phone returns to the key lock mode after the period of time specified in the Phone Lock menu option. To exit the key lock mode, press the UnLock soft key and then press the key again. "Keypad active" appears and the Lock icon no longer displays. Getting Started 23

Section	Page
Intellectual Property	2
Samsung Telecommunications America, L. P.	3
Unpacking	11
Your Phone	12
Phone Layout	12
Display	15
Display Layout	15
Getting Started	18
Installing the SIM Card	18
1. If necessary, switch off the phone by holding down the key until the power-off image is displayed.	18
2. Remove the battery. To do so:	18
3. Slide the SIM card into the SIM card holder so that the holder locks the card in position. Make sure that the cut corner is top left and the gold contacts of the card face into the phone.	18
4. Place the battery back, taking care to match the tabs on the battery with the grooves on the phone.	19
5. Slide the battery towards the top of the phone until it clicks into place. Make sure that the battery is properly installed before switching on the power.	20
Charging a Battery	20
1. With the battery in position on the phone, connect the lead from the travel adapter to the bottom of the phone.	21
2. Connect the adapter to a standard AC wall outlet.	21
3. When charging is finished, disconnect the adapter from the power outlet and from the phone by pressing the grey tabs on both sides of the connector and pulling the connector out.	21
Switching the Phone On/Off	22
1. Hold down the key until the phone switches on.	22
2. If the phone asks for a password, key in the password and press the OK soft key. The phone password is factory set to 00000000. For further details, see page 111.	22
3. If the phone asks for a PIN, key in the PIN and press the OK soft key. For further details, see page 112. The phone searches ...	22
4. When you wish to switch the phone off, hold down the key until the power-off image is displayed.	23
Locking or Unlocking the keypad	23
Call Functions	24
Making a Call	24
1. Press and hold down the 0 key. The + character appears.	24
2. Key in the country code, area code and phone number and press the key.	24
1. If you have typed any characters on the display, clear the display by holding down the key for more than one second.	25
2. Press the key to display a list of the last numbers in the order in which the calls were made.	25
3. Use the and keys to scroll through the numbers until the required number is highlighted.	25
Adjusting the Volume	25
Answering a Call	26
1. Press the key or the Accept soft key to answer the incoming call.	26
2. If the Anykey Answer option in the Extra Settings menu (Menu 5.6) is checked, you can press any key to answer a call except for the key and the Reject soft key (see “Extra settings” on page 86).	26
3. End the call by pressing the key.	26
Viewing Missed Calls	26
To view the missed call immediately	26
1. Press the View soft key.	26
2. The number corresponding to the most recent missed call is displayed, if available.	27
1. Press the Options soft key.	27
2. Press the or key to highlight the Edit option.	27
3. Press the Select soft key.	27
4. Change the number as required. Press the Save soft key. If no change is required press the Exit soft key.	27
1. Press the Options soft key.	27
2. If necessary, press the or key to highlight the Delete option.	27
3. Press the Select soft key.	28
Switching Quickly to the Silent Mode	28
Selecting Functions and Options	29
1. Press the appropriate soft key.	29
Example: Setting the Display Language	30
1. When the idle screen is displayed, press the Menu soft key to access the menus.	30
2. Scroll through the menus until you reach the Phone Settings menu, by pressing the or key.	30
3. To select the Phone Settings menu, press the Select soft key or the key.	30
4. Scroll through the sub-menus until you reach the Language sub-menu, by pressing the or key.	30
5. To view the languages available, press the Select soft key or the key. The current setting is highlighted.	30
6. Scroll through the list of languages until the appropriate one is highlighted, by pressing the or key.	30
7. Press the Select soft key or the key to confirm your selection.	30
8. Press the or key twice to exit the menu structure.	30
Phonebook	31
Storing a Number with a Name	31
1. Key in the number to be stored.	31
2. When you are sure that it is correct, press the Save soft key.	31
3. Select an entry type to identify the category of number to be stored. Four categories are available:	31
4. To select the category, press the or key, followed by the Select soft key.	31
5. Enter the location to store the entry. Press the or key to toggle between the phone and card memories. Press the Select soft key.	31
6. Enter a name and press the OK soft key.	32
7. After storing, the phone displays the phonebook entry or name just created.	32
1. When the idle screen is displayed, press the Ph.Book soft key.	32
2. Scroll to New Entry by pressing the 2 or key and press the Select soft key.	32
3. Select an Entry Type to identify the category of the number to be stored. The following four options are provided:	32
4. Continue the procedure from Step 4 on page 31 to store the number.	32
Using Phonebook Entry Options	33
Searching for and Dialing a Number in the Phonebook	34
1. When the idle screen is displayed, press the Ph.Book soft key. When Search is highlighted, press the Select soft key. You are asked to enter a name.	34
2. Enter the start of the name that you wish to find.	34
3. The phonebook entries are listed, starting with the first entry matching your input. This entry is also highlighted.	34
4. Once you have found the required entry, press the key to dial the number, or press the Options soft key to access the phonebook entry options; for further details, see page 33.	34
1. When the idle screen is displayed, select the Ph.Book soft key to scroll to Group Search by pressing the or key and press the Select soft key. You are asked to enter a group name.	35
2. Enter the start of the group name that you wish to find.	35
3. The caller groups are listed, starting with the first group matching your input. The group is also highlighted.	35
4. Scroll to the required group by pressing the or key and press the View soft key.	35
5. The phonebook entries in the selected caller group are listed.	35
6. Once you have found the required entry, press the key to dial the number, or press the Options soft key to access the phonebook entry options; for further details, see page 33.	35
Editing a Caller Group	35
1. When the idle screen is displayed, select the Ph.Book soft key to scroll to Group Edit by pressing the 4 or key and press the Select soft key.	35
2. Enter the start of the required group name or scroll through the group list by pressing the or key.	35
3. When the required group is highlighted, press the Options soft key.	36
4. Select each option and change the settings, as required. The following options are available.	36
5. When you have finished, press the or key.	36
Speed-Dialing	36
1. When the idle screen is displayed, select the Ph.Book soft key to scroll to Speed Dial by pressing the 5 or key and press the Select soft key.	36
2. Select the key to which you wish to assign the speed-dialing feature (keys 2 to 9) and press the OK soft key.	36
3. Select the required phonebook entry from the list and press the View soft key.	37
4. Select the required number if the entry has more than one number, by pressing the or key and press the Select soft key.	37
5. Once you have assigned a number to the selected key, four options are available:	37
6. When you have finished, press the or key.	37
Deleting All Phonebook Entries	37
1. When the idle screen displays, press the Ph.Book soft key.	37
2. Scroll to Delete All by pressing the Up or Down key and press the Select soft key.	37
3. To place a check mark on the memory you want to empty, ALL, SIM or Phone, press the Mark soft key.	37
4. When you are finished marking, press the Delete soft key to delete the entries in the selected memory.	38
5. Enter the phone password and press the OK soft key.	38
6. When the confirming message appears, press the Yes soft key.	38
7. When you finish deleting, press the or the key.	38
Checking Memory Status	38
1. When the idle screen is displayed, select the Ph.Book soft key to scroll to Memory Status option pressing the 7 or key and press the Select soft key.	38
2. Press the or keys to view the number of existing and remaining entries in the card and phone memories.	38
Entering Text	39
Changing the Text Input Mode	39
Using the T9 Mode	40
1. When you are in the T9 predictive text input mode, start entering a word by pressing keys 2 to 9. Press each key only once for one letter.	40
2. Enter the whole word before editing or deleting the keystrokes.	40
3. If the word is correct, start entering the next word.	40
4. Otherwise, press the 0, or key repeatedly to display alternate word choices for the keys that you have pressed.	40
5. Complete each word with a space by pressing the # key.	40
Using the Upper/Lower-Case Character Mode	41
1. Press the key labeled with the required letter:	41
2. Select the other letters in the same way.	41
Using the Symbol Mode	42
Using the Number Mode	42
In-Call Options	43
Putting a Call on Hold	43
1. Key in the phone number that you wish to dial or look it up in the phonebook.	43
2. Press the key to dial the second call.	43
3. The first call is automatically put on hold.	43
1. Put the current call on hold by pressing the Hold soft key.	43
2. Make the second call in the normal way.	43
Switching the Microphone Off (Mute)	44
1. Press the Options soft key.	44
2. If necessary, press the key to highlight the Mute option.	44
3. Press the OK soft key.	44
1. Press the Options soft key.	44
2. If necessary, press the key to highlight the Unmute option.	44
3. Press the OK soft key.	44
Muting/Sending DTMF	44
Sending a Sequence of DTMF Tones	44
1. When you are connected to the teleservice system, press the Options soft key.	45
2. Press the Down key to highlight the Send DTMF option.	45
3. Press the OK soft key.	45
Searching for a Number in the Phonebook	45
1. Press the Options soft key.	45
2. Press the key to highlight the Phonebook option.	45
3. Press the OK soft key.	45
4. Enter the name that you wish to find.	45
5. To view the highlighted entry, press the Options soft key.	45
New Call	45
Answering a Second Call	46
1. Press the key to answer the incoming call. The first call is automatically put on hold.	46
2. To switch between the two calls, press the Swap soft key.	46
3. To end the current call, press the key.	46
Making a Multiparty Call	46
1. Call the first participant in the normal way.	46
2. Call the second participant in the normal way. The first call is automatically put on hold.	46
3. To join the first participant to the multiparty call, press the Options soft key and select the Join option.	46
4. To add a new person to the multiparty call, call the person in the normal way, then press the Options soft key and select the Join option.	47
1. Press the Options soft key and choose the Select one option.	47
2. Highlight the required person, by pressing the or key, followed by the Select soft key or the key.	47
3. Select the Private option.	47
4. To return to the multiparty call, press the Options soft key and select Join.	47
1. Press the Options soft key and choose the Select one option.	47
2. Highlight the required person, by pressing the or key, followed by the Select soft key or the key.	47
3. Select Remove.	47
4. End the multiparty call by closing the phone or pressing the key.	48
Using the Menus	49
Accessing Menu Functions by Scrolling	49
1. In idle mode, press the Menu soft key to access the menu facility.	49
2. Scroll with the or key to reach the required main menu, Phone Settings for example. Press the Select soft key or the key to enter the menu.	49
3. If the menu contains any sub-menus, Language for example, you can access them by scrolling with the or key and pressing the Select soft key.	49
Accessing Menu Functions by Using Shortcuts	50
1. Press the Menu soft key.	50
2. Press 5 for Phone Settings.	50
3. Press 4 for Language.	50
List of Menu Functions	51
Text Messages	56
1. Select the required box and press the Select soft key.	56
2. Select the required message and press the View soft key to view the message contents.	56
3. To scroll through the message, press the or key.	56
Create	57
1. Create your message as required.	57
2. When you have completed your message, press the Options soft key. The following options are available.	57
3. Select Send Only or Save and Send, and press the Select soft key.	58
4. Enter a destination number and press the OK soft key. The message is sent.	58
1. Create your message as required.	58
2. Press the Options soft key.	59
3. Select one of the following options as required by using the and keys and pressing the Select soft key.	59
4. Complete the message, and send or save it by following the procedure from Step 2 on page 57.	59
Inbox	59
2. To scroll through the contents, press the Up or Down key.	60
3. To scroll to the previous or next message, press the or key.	60
Outbox	60
2. To scroll through the contents, press the Up or Down key.	61
3. To scroll to the previous or next message, press the or key.	61
Templates	62
Settings	62
Delete all	63
Memory status	63
Voice mail	64
Broadcast	64
Picture messages	66
Create	66
1. Enter the subject of your message and press the OK soft key.	66
2. When Add here highlights, press the Options soft key and add the message contents using one of the following options:	66
3. When the added content displays, press the Down key to highlight Add here.	67
4. Repeat steps 2 and 3 until you finish creating your message.	67
5. If you want to change the added items, press the Up or Down key to highlight one and press the Options soft key. The following options are available:	67
6. When you finish creating the message, choose Send from the options and press the Select soft key.	68
7. Select a destination type, To, Cc, or Bcc and press the Select soft key. Choose one of the following options and press the Select soft key:	68
8. Enter a number or an e-mail address, or select a number in Phonebook.	68
9. When the correct number or address displays, press the OK soft key.	68
10. To send the message to multiple destinations, select Add destination and press the Select soft key.	68
11. Repeat steps 7 to 10. You can enter up to 10 destinations.	69
Inbox	69
1. Press the View soft key to view the message.	69
2. To scroll through the message information, press the Up or Down key.	69
1. Select a message and press the Select soft key to view the message.	70
2. To scroll through the message, press the Up or Down key.	70
3. Press the OK soft key on the message presentation screen.	70
Outbox	71
1. Select a message and press the Select soft key to view the message contents.	71
2. To scroll through the message, press the Up or Down key.	71
3. Press the OK soft key on the message presentation screen.	71
Draft	72
Templates	72
Delete all	72
Memory status	72
Call records	73
Missed calls	73
Incoming calls	73
Outgoing calls	74
Delete all	74
Call time	74
Sound settings	76
Ring tone	76
Ring volume	76
Alert type	76
Keypad tone	77
Message tone	77
Alert on Call	78
Power On/Off	79
Extra tones	79
Phone settings	80
Display settings	80
1. Scroll through the list by pressing the or key.	80
2. Press the Select soft key when the required image is highlighted.	80
3. After viewing the image, press the Select soft key to display it on the idle screen.	80
4. To change the Text color, scroll through the list by pressing the or key. Select the color desired and press the Select soft key.	80
1. Adjust the contrast by using the and navigation keys or the Volume keys on the left side of the phone.	81
2. When you are satisfied, press the OK soft key to save the selection.	81
Greeting message	82
Own number	83
Language	83
Security	83
Extra settings	86
Short cut	87
1. Select the key to be used as a shortcut key by pressing the or key, followed by the Select soft key.	87
2. Select the menu option to be assigned to the key by pressing the or key.	87
3. Press the Select soft key to save the selection.	87
Reset settings	87
1. Select the Reset settings menu option.	87
2. Enter the 8-digit phone password and press the OK soft key.	87
Organizer	88
Alarm	88
1. Choose the type of alarm to be set.	88
2. Enter the required time and day of the week, if applicable.	88
3. Press the OK soft key.	88
4. If you select Morning Call in Step 1, select the repeat option: Monday to Friday or Monday to Saturday.	88
Calendar	89
1. Select the required date in the calendar, using the navigation keys.	89
2. Press the Select soft key.	90
3. Enter your memo and then press the OK soft key.	90
4. If you want the alarm to ring on the chosen day, press the Yes soft key.	90
5. If you pressed the Yes soft key, set the time for the alarm and press the OK soft key.	90
1. To edit a memo, select the Calendar menu option.	90
2. Press the Options soft key.	90
3. Select the Edit menu option and edit the memo appropriately.	90
Time & date	91
1. Select the city corresponding to your time zone by pressing the and key one or more times.	92
2. Press the Set soft key.	92
Calculator	92
1. Enter the first number using the numeric keys.	92
2. Press the right soft key until the required arithmetic symbol appears: + (add), - (subtract), x (multiply), / (divide).	92
3. Enter the second number.	92
4. Repeat Steps 1 to 3 as many times as required.	92
5. To calculate the result, press the key.	92
To do list	92
1. Press the New soft key.	93
2. Enter the first task.	93
3. Press the OK soft key.	93
4. Select high, normal or low priority using the or key and press the Select soft key.	93
5. Enter your deadline.	93
6. Press the OK soft key.	93
Voice memo	95
1. Replay	95
2. Re-record	95
3. Save	95
4. Quit	95
1. Play	95
2. Send	95
3. Rename	95
4. Information	95
5. Delete	95
Currency exchange	95
1. Enter the current exchange rate of your source currency and press the OK soft key.	96
2. Enter the amount for which you wish to conduct the currency conversion and press the OK soft key.	96
3. Press the soft key to exit the currency convertor.	96
Network Services	97
Call forwarding	97
1. Select the type of call forwarding required by pressing the or key until the appropriate option is highlighted, and then press Select.	98
2. Select the type of calls to be forwarded by pressing the or key until the appropriate option is highlighted and then press Select.	98
3. Enter the number to which the calls are to be forwarded and press OK. To enter the international code, press the 0 key until the + sign is displayed.	98
Call waiting	98
1. Select the type of calls to which the call waiting option is to be applied by pressing the or key until the appropriate option is highlighted and then press the Select soft key.	99
2. You can activate or deactivate the call waiting feature as necessary by using the Activate or Deactivate soft key respectively.	99
Network selection	99
1. When Network selection is displayed, press the Select soft key.	99
2. Press the or key until the appropriate option is highlighted and then press the OK soft key.	99
3. Press the or key until the preferred network is highlighted and then press the OK soft key.	100
Caller ID	100
Funbox	101
t-zones	101
1. Select an empty location and press the Options soft key.	101
2. Enter the address and press the Enter soft key.	101
3. Enter a name for the favorite item and press the Enter soft key.	101
Games	102
Sounds	103
Images	103
Delete all	103
Memory status	103
AIM	104
Sign on	104
1. Use the Up or Down navigation keys to select the Sign on menu option. Press the Select soft key.	104
2. Enter your Screen name and press the OK soft key. Enter your password and press the OK soft key.	104
Offline convs.	105
Settings	106
Help	106
Sign off	106
Solving Problems	108
Access Codes	111
Phone Password	111
PIN	112
PUK	112
1. Key in the PUK and press the OK soft key.	112
2. Enter a new PIN of your choice and press the OK soft key.	112
3. When the Confirm New PIN message is displayed, key in the same code again and press the OK soft key.	112
PIN2	112
PUK2	113
1. Key in the PUK2 and press the OK soft key.	113
2. Enter a new PIN2 of your choice and press the OK soft key.	113
3. When the Confirm PIN2 message is displayed, key in the same code again and press the OK soft key.	113
WAP Browser	114
About the WAP Browser	114
1. When the idle Screen is displayed, press the Menu soft key to enter the menu mode.	114
2. Press the or until the Funbox menu option is displayed, and then press the Select soft key. You can also press the 8 key directly.	115
3. Press the or key one or more times to highlight t- zones, then press the Select soft key. You can also press the 1 key directly.	115
4. Press the or key one or more times to highlight the required option and then press the Select soft key.	115
Using the WAP Browser	116
1. Press and hold down the key. A menu is displayed.	118
2. Highlight the required menu option by pressing the and keys.	118
3. Select the option by pressing the Select soft key.	118
4. If necessary, select the secondary option using the and keys, and press the Select soft key to confirm.	118
Health and Safety Information	120
Exposure to Radio Frequency (RF) Signals	120
For Body Operation	121
Precautions When Using Batteries	122
Road Safety	123
1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.	123
2. When available, use a hands-free device. If possible, add an extra layer of convenience and safety to your wireless phone with one of the many hands-free accessories available today.	123
3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you.	123
4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous.	123
5. Do not take notes or look up phone numbers while driving. Jotting down a To Do list or flipping through your phonebook takes your attention away from your primary responsibility, driving safely.	123
6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to...	124
7. Do not engage in stressful or emotional conversations that may be distracting. Make the people with whom you are talking aware that you are driving and suspend conversations that have the potential to divert your attention from the road.	124
8. Use your wireless phone to call for help. Dial the emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!	124
9. Use your wireless phone to help others in emergencies. If you see a car accident, crime in progress or other serious emergency where lives are in danger, call the emergency number, as you would want others to do for you.	124
10. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one ap...	124
Operating Environment	124
Electronic Devices	125
Potentially Explosive Environments	126
Emergency Calls	127
1. If the phone is not on, switch it on.	127
2. Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.	127
3. Press the key.	127
Other Important Safety Information	128
Care and Maintenance	128
Acknowledging Special Precautions and the FCC and Industry Canada Notice	129
1. This device may not cause harmful interference, and	130
2. This device must accept any interference received.	130
Appendix A: CERTIFICATION INFORMATION (SAR)	131
Appendix B: Guide to Safe and Responsible Wireless Phone Use	133
1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and le...	134
2. When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Wheth...	134
3. Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can g...	134
4. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are dr...	134
5. Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a “...	134
6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to...	135
7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and drivi...	135
8. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself an...	135
9. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a “Good S...	135
10. Call roadside assistance or a special wireless non- emergency assistance number when necessary. Certain situations you encou...	135
Appendix C: Consumer Update on Wireless Phones	137
1. What kinds of phones are the subject of this update?	137
2. Do wireless phones pose a health hazard?	137
3. What is FDA’s role concerning the safety of wireless phones?	138
4. What is FDA doing to find out more about the possible health effects of wireless phone RF?	139
5. What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?	140
6. What about children using wireless phones?	140
7. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?	141
8. Do wireless phone accessories that claim to shield the head from RF radiation work?	141
9. What about wireless phone interference with medical equipment?	142
10. What are the results of the research done already?	142
11. What research is needed to decide whether RF exposure from wireless phones poses a health risk?	143
12. Which other federal agencies have responsibilities related to potential RF health effects?	144
Glossary	150
Index	155
A	155
B	155
C	155
D	155
E	156
F	156
G	156
H	156
I	156
K	156
L	156
M	156
N	157
O	157
P	157
R	157
S	158
T	158
U	158
V	159