Samsung SHR-8162 User Manual - Page 56
Setting the Protocol, If selected Multicast, Multicast IP and TTL are activated.
View all Samsung SHR-8162 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
using the DVR • IP, Gateway, Subnet Mask, and DNS - For : You can directly input IP address, Gateway, Subnet Mask and DNS. - For : IP address, Gateway, and Subnet Mask are set automatically. - For : IP address, Gateway, and Subnet Mask are set automatically. • User ID, Password : In case you selected ADSL, provide the "User ID" and its "Password". Connection Mode Connection Protocol Connection Mode Bandwidth ADSL 600kbps IP Gateway Subnet Mask DNS User ID Password 192.168. 1.200 192.168. 1. 1 255.255.255. 0 Manual 168.126. 63. 1 ID ******** OK Cancel M DNS server for and can be set by user only if you selected . 6. When the connection setup is done, press . Setting the Protocol 3. Use the up/down buttons (▲▼) in window to move to , and press [ENTER] button. 4. Select . 5. Use direction buttons to move to a desired item, and set the value. Connection Mode Connection Protocol Protocol Type Port(TCP) Port(UDP) Unicast/Multicast Multicast IP TTL Webviewer Port TCP 554 ~ 557 8000 ~ 8159 Unicast 224.126. 63. 1 5 80 • Protocol Type : Select the protocol type between TCP and UDP. If selected UDP, selections of Port (TCP), Port (UDP), and Unicast/ Multicast are activated. OK Cancel • Port (TCP) : Initially, is set. It increases / decreases by 4. - TCP: It has better stability and lower speed when compared to UDP, and recommended for internet environments. • Port (UDP) : Initially, is set. It increases / decreases by 160. - UDP : It has less stability and faster speed when compared to TCP, and recommended for local area network (LAN) environments. • Unicast, Multicast : Select one between Unicast and Multicast. If selected Multicast, Multicast IP and TTL are activated. - Unicast : Transfers data (UDP, TCP) individually to each connecting client. - Multicast : Multiple client can receive the data (only in UDP) without putting additional traffic load to the network. • Multicast IP : User can directly input. • TTL : Select from 0 ~ 255. Initial value for the TTL is set to . • Webviewer Port : Enter the port number for the Web Viewer. Initially, it is set to . 6. When the protocol setup is done, press . 56_ using the DVR