Samsung SHR-8162 User Manual - Page 63

USING THE DVR Preset Setting A preset is a set of specific target points of a PTZ camera, and up to 20 presets per a camera can be stored. Using the mouse may help easy setup. 1. In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction. 2. Select the key. The virtual keyboard for inputting the preset will appear.  Refer to "Using Virtual Keyboard". (Page 36) • Save/Add : You can add and save the preset. • Rename : You can change the settings of the existing presets. • Delete : Deletes the selected preset. • Delete All : Deletes all existing presets. M  If you replace the camera of the channel that stores the preset list with a new one, you should reset the preset accordingly. 3. Press . The preset will be saved as a name that you entered. Camera Setting A PTZ camera has its own menu system. Optimize the PTZ camera according to the DVR. Using the mouse may help easy setup. 1. Connect the PTZ camera to the DVR and run the PTZ camera again to display the camera's protocol setting window. SAMSUNG PROTOCOL 2. Check the protocol ID of the camera.  In "Device > Setting the PTZ", enter the PTZ camera ID in the ID input box of the channel that is connected to the PTZ camera. (Page 42) ADDR TYPE BAUD LENS TILT PAN 0 RS-485,HALF 9600 OK! OK! OK! 3. Select in the PTZ Control menu. The camera-specific menu appears.  You can configure the settings of only those cameras that support the protocols of Samsung and Panasonic.  If you are setting Auto Pan or Pattern in the camera menu, press and hold the appropriate button for a certain time so that the button operation can be different from that in normal PTZ setting. ** MAIN MENU ** Camera Setup OK Exit CAMERA SET ... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... CLOCK SET... SYSTEM INFO... English _63