Samsung SL-M3870FW User Manual Ver.1.0 (English) - Page 177

Wireless network setup 3 Press OK when the confirmation window appears. 4 The eight-digit PIN appears on the display. You need to enter the eight-digit PIN within two minutes on the computer that is connected to the access point (or wireless router). The messages are displayed on the display screen in the order below: a Connecting: The machine is connecting to the wireless network. b Connected: When the machine is successfully connected to the wireless network, the WPS LED light stays on. c SSID Type: After completing the wireless network connection process, the AP's SSID information is displayed on the LCD display. 5 Insert the supplied software CD into your CD-ROM drive, and follow the instructions in the window to set up the wireless network. Machines without a display screen Connecting in PBC mode 1 Press and hold the (WPS) button on the control panel for about 2 - 4 seconds until the status LED blinks quickly. The machine starts connecting to the wireless network. The LED blinks slowly for up to two minutes until you press the PBC button on the access point (or wireless router). 2 Press the WPS (PBC) button on the access point (or wireless router). a The light blinks fast on the WPS LED. The machine is connecting to the access point (or wireless router). b When the machine is successfully connected to the wireless network, the WPS LED light stays on. 3 Insert the supplied software CD into your CD-ROM drive, and follow the instructions in the window to set up the wireless network. 2. Using a Network-Connected Machine 177