Samsung WA5471ABW/XAA User Manual (user Manual) (ver.1.0) (English) - Page 15
Important Note To Installer - washer 01
View all Samsung WA5471ABW/XAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
01 installing your washer IMPORTANT NOTE TO INSTALLER Please read the following instructions carefully before installing your Washer. These instructions should be retained for future reference. We recommend you hire a professional to install this washer. STEP 1 Selecting a Location Before you install your washer, make sure the location: • Has a hard, level surface without carpeting or flooring that may obstruct ventilation. • Has no dust, oil and detergent etc. • Is away from direct sunlight • Has adequate ventilation • Will not freeze (temperatures are never below 32°F or 0°C) • Is away from heat sources such as oil or gas • Provides enough slack for the power cord. • Doesn't have any carpeting that will obstruct ventilation openings. STEP 2 Installing your Washer 1. If you use a stand pipe, make sure the connection between the drain hose and the standpipe is NOT airtight. The standpipe must be at least 39 in or 99 cm high. You must always exercise caution to avoid collapsing or damaging the drain hose. For best results, the drain hose should not be restricted in any way - by 96" Max elbows, couplings, or excessive length. For situations where the drain hose cannot be conveniently elevated to at least 39 in or 99 cm, the drain hose must be supported. Hose retainer 39" Tie strap Do not insert the drain hose too far into the stand pipe: 6 - 8 inches, and no more. WA5471ABP-03050A_EN.indd Sec3:15 installing your washer _15 2011-03-04 1:51:30