Samsung WA54R7600AC/US User Manual - Page 23
STEP 4, Level the washer
View all Samsung WA54R7600AC/US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installation * A (*): Min. 6 in. (152 mm), Max. 8 in. (203 mm) STEP 4 Level the washer A 3. Route the drain hose to the drain system. CAUTION • If using a standpipe, make sure the standpipe and drain hose connection is not airtight. • If using a standpipe, make sure the drain hose is inserted at least 6 in. (152 mm) but no more than 8 in. (203 mm) into the standpipe. 4. Secure the drain hose with cable ties. 1. Slide the washer into position. 2. Open the lid of the washer, and then pour the water into the tub until the blades of the pulsator on the bottom of the washer are about half covered. 3. If the washer is level, the pulsator (A) will be positioned at the center of the tub as shown in the figure and the water will appear level in the tub. That is, the water will reach the same height on all sides of the tub. English 23