Sanyo DMP-692 Owners Manual
Sanyo DMP-692 Manual
 |
UPC - 086483076466
View all Sanyo DMP-692 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo DMP-692 manual content summary:
- Sanyo DMP-692 | Owners Manual - Page 1
- Sanyo DMP-692 | Owners Manual - Page 2
RADIO OPERATION ...16 PRESETTING STATIONS IN THE TUNER MEMORY 18 SLEEP TIMER...20 ALARM SETTING ...21 iPod / iPhone OPERATION ...23 DOCK ADAPTOR COMPATIBILITY 25 iPod / iPhone OPERATION CONTROLS 26 TROUBLESHOOTING GUIDE...28 TECHNICAL SPECIFICATION 29 THE UNIT SUPPORTS THE LISTED iPods / iPhones - Sanyo DMP-692 | Owners Manual - Page 3
for choosing SANYO. This digital music system comes with dual docks for playing and charging iPhone/iPod, an AM/FM stereo digital tuner with 40 presets, dual alarm clock function with wake to iPhone/iPod/radio/buzzer, jumbo backlit LCD display with six level dimmer control, two 2.5" speaker drivers - Sanyo DMP-692 | Owners Manual - Page 4
the manufacturer's instructions. 3.) Only use injury from tip-over. 5.) Use replacement parts as specified by the manufacturer. 6.) Do power supply to reset the unit software, the unit will return to normal opeation. 18.) To prevent fire or shock hazard, do not use this plug with an extension cord - Sanyo DMP-692 | Owners Manual - Page 5
. 22.) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 23.) Do not overload wall outlet. Use only power source as indicated. 24.) Upon completion of any service or repairs to this product, ask - Sanyo DMP-692 | Owners Manual - Page 6
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This - Sanyo DMP-692 | Owners Manual - Page 7
the AC adaptor, the 6 iPod® adaptors, the lithium battery(CR2032) event that the unit ever needs to be returned for service. • Remove any descriptive labels or stickers from the fire or shock hazard, disconnect your unit from the mains power source when cleaning. • If the cabinet becomes dusty wipe - Sanyo DMP-692 | Owners Manual - Page 8
back-up circuit that will maintain the time and alarm settings, and the preset tuner memories, in the event of a temporary power interruption. The battery back-up system requires one 3-Volt lithium button cell (Type CR2032 or equivalent). If the back-up battery is not installed, or the battery - Sanyo DMP-692 | Owners Manual - Page 9
BATTERY BACK-UP SYSTEM Battery Precautions Follow these precautions when using a battery in this device. 1. to excessive heat such as sunshine, fire or the like. Using The AC Adaptor Connect the small female plug of the AC adaptor to the DC In Jack on the back panel. Connect the housing of the AC - Sanyo DMP-692 | Owners Manual - Page 10
18 19 20 1 . iPod Indicator 2 . Universal Dock for iPod 3 . Universal Dock for iPod/iPhone 4 . iPod/iPhone Indicator 5 . STANDYBY/ON iPod SELECT Button 16. Remote Sensor 17. FM ANTENNA 18. AM ANTENNA Socket 19. AUX IN Jack 20. DC IN Jack 21. Back-Up Battery Compartment (On Bottom Cabinet) 22. iPod - Sanyo DMP-692 | Owners Manual - Page 11
OF CONTROLS & INDICATORS LCD DISPLAY Wake To Indicator; iPod,Radio,Buzzer. Alarm 1 / 2 'On' Indicators Left iPod Indicator FM/AM Indicator Daylight Savings Time AUX/Radio Frequency/ Volume Level/ EQ/ DBBS Indicator Right iPod Indicator STEREO Indicator TIME AM / PM Indicator SLEEP, SNOOZE - Sanyo DMP-692 | Owners Manual - Page 12
CONTROL 1 2 3 16 4 5 17 6 7 18 8 PRESET / MENU 19 9 20 10 11 21 12 13 22 14 15 DMP-692 Using The Remote Control 1 . Remote Control Transmitter 2 . STANDBY/ON Button 3 . MUTE Button 4 . VOLUME Button 5 . FM ST/MO Button 6 . DBBS Button 7 . SLEEP Button 8 . TIME SET - Sanyo DMP-692 | Owners Manual - Page 13
system as shown below. The connection cable is not included: Select the AUX mode by repeatedly touching the MODE button on the top panel or by repeatedly pressing the MODE button on the remote control until the "AUX" indicator appears above the time display. External audio source plug Signal cord - Sanyo DMP-692 | Owners Manual - Page 14
iPod SELECT control, are special 'Sensor-Touch' controls. There are no buttons to 'push'. When you softly touch one of these 'buttons', it will flash 3 times to confirm it understood the command, and then the system confirm that the clock is showing Daylight button on the remote control. Until the - Sanyo DMP-692 | Owners Manual - Page 15
/ON button to turn the system 'On'. The clock can only be set when the system is in the Standby Mode. 1.) Touch and hold the TIME SET control on the top panel, or depress and hold the TIME SET button on the remote control until only the "Hour" digits are flashing. 2.) Touch the TUNE/SKIP - Sanyo DMP-692 | Owners Manual - Page 16
music. Press the EQ button on the remote control to cycle through the following equalization modes: → EQ1(FLAT) → EQ2(CLASSIC) → EQ3(ROCK) → EQ4(POP) → EQ5(JAZZ) The appropriate EQ indicator briefly appears in the display to confirm your selection. The system remembers the EQ setting when the power - Sanyo DMP-692 | Owners Manual - Page 17
RADIO OPERATION 1.) Press the STANDBY/ON button on the top panel or on the remote control to turn the system 'On'. The initial default Mode for this system is the iPod function. The "iPod®" indicator will flash that station. Manual Tuning Repeatedly press the / buttons on the remote control or touch - Sanyo DMP-692 | Owners Manual - Page 18
RADIO OPERATION Hits For Better Reception FM: The FM lead wire antenna on the back panel should be extended to its full length. You may also have to vary the direction of this antenna until you find the position that provides the best reception. FM ANT AM: Insert the small black plug at - Sanyo DMP-692 | Owners Manual - Page 19
tuner memory for easy recall at any time. Use either the Automatic or Manual tuning methods described on page 16 to tune to the first station to be the remote control or touch TIME SET / MEMORY on the top panel. The P - 01(Preset Memory #1) indicator will begin flashing in place of the radio - Sanyo DMP-692 | Owners Manual - Page 20
will maintain the preset tuner memories in the event of a power interruption. However if the back up batteries are not installed, or exhausted, and the Adaptor is disconnected from the wall outlet or the plug is removed from the back of this system, the preset tuner memories will be erased. It will - Sanyo DMP-692 | Owners Manual - Page 21
music and then turns the unit to standby automatically. To operate the sleep timer: 1.) Turn the system 'On' and operate the TUNER function as usual. 2.) Press the SLEEP button on the remote to the Standby (Power 'Off") mode automatically. Note: • You can shut the unit off manually before the Sleep - Sanyo DMP-692 | Owners Manual - Page 22
up minutes. 5). Press the ALM 1 button once more to select the wake-up Alarm Mode (iPod, Radio or Buzzer). One of the 3 Alarm Mode indicators will be flashing in the display. Press the or buttons on the remote control or touch the TUNE/SKIP or control on the top panel repeatedly to select the - Sanyo DMP-692 | Owners Manual - Page 23
iPod or radio mode, and the system is in iPod or radio operation mode at the wake up time, the system will default to the wake to Buzzer mode automatically. 9). To shut the alarm off sooner, press the STANDBY/ON (Power the SNOOZE / DIMMER button on the remote control to control the brightness of the - Sanyo DMP-692 | Owners Manual - Page 24
iPod/iPhone OPERATION This SANYO system includes two separate docking stations so that you can dock and charge two separate iPod models, or one iPod and one iPhone model simultaneously. Since this model is 'Works With iPhone' certified it is not necessary to place your iPhone in the Airplane mode to - Sanyo DMP-692 | Owners Manual - Page 25
the correct insert for your iPod / iPhone and that it is properly docked into this unit. FAILURE TO DO SO MAY DAMAGE THE iPod / iPhone. When an iPod / iPhone is inserted into the dock, it will go to standby mode then turn off. While the iPod / iPhone is docked in the system, it will recharge (until - Sanyo DMP-692 | Owners Manual - Page 26
Dock Adaptor Compatibility A B C D E F 3G iPhone 3GS iPhone iPhone 4G nano 8GB 16GB 16GB 32GB 4GB 8GB 16GB 8GB 16GB 120GB 160GB 25 - Sanyo DMP-692 | Owners Manual - Page 27
the correct adaptor into the right dock and then insert your iPod or iPhone into the adaptor. The word "iPod" stops flashing and remains 'On''. Your iPod/iPhone display will come on. If you were playing music on your iPod/iPhone before inserting in the dock your iPod/iPhone may change to pause mode - Sanyo DMP-692 | Owners Manual - Page 28
will begin playback of that song. 6). If you have two iPod models, or an iPod and an iPhone docked at the same time you can switch between the two devices by pressing the iPod SELECT button on the top panel or the remote control. 7). To pause iPod playback touch the control on the top panel or - Sanyo DMP-692 | Owners Manual - Page 29
the dock. iPod is locked up/frozen iPod battery has problem Please make sure your iPod is working properly before docking into the unit. Please refer to the iPod manual for details. Remarks: If troubleshooting(see above)does not eliminate the problem, disconnect the unit from the mains power and - Sanyo DMP-692 | Owners Manual - Page 30
x 136.7mm(D) X 122.5mm(H) 1.35 Kg 2. Amplifier Power Output 5W x 2 THD 10% 3. Tuner AM Tuning range FM Tuning range 520 KHz to 1710 KHz 87.5 MHz to 108.0 MHz 4. Speaker system Impedance 8 Ω 2.5" Speaker X2 + passive subwoofer panel system 5. AUX IN Input Max voltage Impedance Φ3.5mm 1 V 47 - Sanyo DMP-692 | Owners Manual - Page 31
THE UNIT SUPPORTS THE LISTED iPods / iPhones *iPod / iPhone charge and operation only* ***iPods / iPhones shown are not included*** Made for iPod mini (4GB, 6GB only) Made for iPod with color display (4th generation) (20GB, 30GB only) Made for iPod (4th generation) (20GB only) Made for iPod with - Sanyo DMP-692 | Owners Manual - Page 32
LABOR 90 DAYS PARTS 90 DAYS For Product Purchased in Canada: Please visit ca.sanyo.com for up-to-date-Warranty details. EXCLUSIONS This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model's instructions manual, or (B) the repair of any - Sanyo DMP-692 | Owners Manual - Page 33
sanyo.com para obtener detalles de garantía actualizados. EXCLUSIONES Esta garantía no cubre (A) el ajuste de controles operados por el cliente como se explica en el manual el envío o tránsito, modificaciones o reparación por parte del usuario, abusos, mal uso, negligencia, accidentes, voltaje - Sanyo DMP-692 | Owners Manual - Page 34
SERVICE AGRÉÉ DE SANYO AU MOMENT OÙ LE SERVICE DE GARANTIE EST EXIGÉ. Pour l'entretien au Mexique, si aucun Centre de service n'est disponible dans la ville où le produit a été acheté, l'utilisateur devra envoyer le produit conformément aux instructions ÉTATS-UNIS ET AU CANADA, CERTAINS ÉTATS ET - Sanyo DMP-692 | Owners Manual - Page 35
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
 |
 |
