Sanyo DMP-692 Owners Manual - Page 17

RADIO OPERATION 1.) Press the STANDBY/ON button on the top panel or on the remote control to turn the system 'On'. The initial default Mode for this system is the iPod function. The "iPod®" indicator will flash above the time display. 2.) Touch the MODE button on the top panel or press the MODE button on the remote control until a FM or AM frequency appears above the time display. 3.) Tune to the desired station as follows: Automatic Tuning Press and hold the / buttons on the remote control or touch the TUNE/SKIP / buttons on the top panel until the frequency display starts to change, then release the buttons. The Tuner will search up or down the band for the next strong signal and stop on that station. Manual Tuning Repeatedly press the / buttons on the remote control or touch the TUNE/SKIP / buttons on the top panel until the display shows the frequency of the desired station. Note: Use the Manual Tuning method to tune to stations with weaker signals that may be bypassed during Automatic Tuning. 4.) If you tuned to a FM Stereo station the Stereo (ST) indicator will appear in the display. If FM stereo reception is noisy or weak, press the FM ST/MO button on the remote control to select the FM Mono mode. This will usually improve the reception but the sound will no longer be in stereo. 5.) When you finished listening press the STANDBY/ON button on the top panel or on the remote control to turn the system 'Off'. The radio station frequency disappears from the display. 16