Sanyo DMP-692 Owners Manual - Page 19
Presetting Stations In The Tuner Memory
UPC - 086483076466
View all Sanyo DMP-692 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
PRESETTING STATIONS IN THE TUNER MEMORY Up to 40 stations (20 AM / 20 FM) can be stored in the tuner memory for easy recall at any time. Use either the Automatic or Manual tuning methods described on page 16 to tune to the first station to be stored in memory. (Example "FM 103.5 MHz") 1.) When the desired station frequency appears in the display, press and release the TIME SET / MEMORY button on the remote control or touch TIME SET / MEMORY on the top panel. The P - 01(Preset Memory #1) indicator will begin flashing in place of the radio frequency display. To enter your station in Preset Memory #1, press the TIME SET / MEMORY button on the remote control or touch TIME SET / MEMORY control on the top panel again. The P - 01 will stop flashing and remain on the display for 5 seconds, and then the display will return to the selected radio frequency. Your selected station has now been entered in Preset Memory #1. Note: You must press the TIME SET / MEMORY button while the memory indicator is flashing in order to enter the station in memory. If the memory indicator stops flashing the station will not be entered in the memory. 2.) Tune to the next station that you want to memorize and when that station appears in the display press the TIME SET / MEMORY once. The P - 01 indicator begins flashing. Press the PRESET / MENU + or - button on the remote control or touch PRESET / ALM1 - or PRESET / ALM2 + control on the top panel to select a different preset memory number, and then press the TIME SET / MEMORY button once more to enter your station in the selected preset memory number. 3.) Repeat Step 2, choosing a different preset memory number each time until you have entered up to 20 stations on one band. You may then select the AM band and follow the same procedure to preset up to 20 AM stations in the tuner memory. 18