Sanyo DMP-692 Owners Manual - Page 15
Setting The Clock - flashing
UPC - 086483076466
View all Sanyo DMP-692 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
SETTING & BASIC OPERATION Setting The Clock When the system is connected to the 120V 60Hz AC Outlet for the first time, "AM 12:00" will flash on the display. Important: Do not press the STANDBY/ON button to turn the system 'On'. The clock can only be set when the system is in the Standby Mode. 1.) Touch and hold the TIME SET control on the top panel, or depress and hold the TIME SET button on the remote control until only the "Hour" digits are flashing. 2.) Touch the TUNE/SKIP / Buttons on the top panel, or press the / Buttons on the remote control to set the correct hour. Be sure to observe the AM/PM indicators to confirm that the hour is set correctly. 3.) Touch the TIME SET button on the top panel or depress the TIME SET button on the remote control then the "Minute" digits are flashing. Press the / buttons on the remote control or touch the TUNE/SKIP / buttons on the top panel to set the correct minute. 4.) When the correct time appears on the display, touch the TIME SET button on the top panel or press the TIME SET button on the remote control once more. The display stops flashing and the clock begins to run. 14