Sanyo ICR-1000 Instruction Manual - Page 29
Gb-28, Pc Connection
View all Sanyo ICR-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
PC CONNECTION 1. Slide the POWER switch to OFF. 2. Connect the unit to the PC using the USB cable (attached) as shown in the illustration. USB port USB cable DIGITAL I/O terminal Note: • When the unit is connected to the PC, none of the operating buttons on the unit work. • When using a new SD Card, "ERASE ALL MEMORY" without connecting the unit to PC. (See page 22.) • Do not format the SD Card with PC. [ENGLISH] GB-28
[ENGLISH]
GB-28
USB port
USB cable
DIGITAL I/O terminal
PC CONNECTION
1.
Slide the POWER switch to OFF.
2.
Connect the unit to the PC using the USB cable (
attached
) as shown in
the illustration.
Note:
•
When the unit is connected to the PC, none of the operating buttons on
the unit work.
•
When using a new SD Card, “ERASE ALL MEMORY” without connecting
the unit to PC. (See page 22.)
•
Do not format the SD Card with PC.