Sanyo PDG-DXL2000 RS232C Expand - Page 25

PDG-DXL2000 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command "CF_INPUT_%1"[CR] "CONPUTER1" ----- Select Computer1 Input "COMPUTER2" ----- Select Computer2 Input "HDMI Select HDMI Input %1 "VIDEO Select Video Input "S-VIDEO Select S-video "UP The same operation as pressing Up key or Left key "DN The same operation as pressing Down key or Right key Details Select Input The same operation as "INPUT" button of the projector and Remote Control. This command is available in normal Power ON status. Projector returns "101" by selecting Computer 2 while Monitor out is selected in Terminal menu. Acceptable "000"[CR] Response Unacceptable "Error code"[CR] 8.6.2 CF_SOURCE Command Command "CF_SOURCE_%1"[CR] Input is Computer 1 "ANALOG" --------- Select Analog Input "YPBPR Select Component Input "SCART Select Scart Input "UP The same operation as pressing Up key or Left key "DN The same operation as pressing Down key or Right key Input is Computer 2 ""ANALOG" --------- Select Analog Input "UP" "DN" Projector accepts parameter "UP"/"DN" but no operation is made. %1 "HDMI Select HDMI Input Input is HDMI "UP" "DN" Projector accepts parameter "UP"/"DN" but no operation is made. Input is Video "VIDEO Select Composite Video Input "UP" "DN" Projector accepts parameter "UP"/"DN" but no operation is made. Input is S-video S-VIDEO Select S-video Input "UP" "DN" Projector accepts parameter "UP"/"DN" but no operation is made. Details Select Source of currently selected Input When Input specified by %1 is inappropriate for selected Input, the projector returns "101" and the command is not executed. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 24/72