Sanyo PDG-DXL2000 RS232C Expand - Page 41

PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.20 CF_ON-STA Command Command "CF_ON STA_%1"[CR] "ON Set Direct on active "OFF Set Direct on inactive %1 "UP Switch setting (On → Off → On → ) "DN Switch setting (On → Off → On → ) Note) "UP" and "DN" behave the same. Details Set/Cancel Power ON Start The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.21 CF_CCAPTIONDISP Command Command "CF_CCAPTIONDISP_%1"[CR] "OFF Select Off "CC1 Select CC1 %1 "CC2 Select CC2 "CC3 Select CC3 "CC4 Select CC4 Details Select channel of Closed caption. The status set with this command is stored in EEPROM and its setting is effective even after ALL is OFF. This command is available in normal Power ON status. Response Note)Closed caption is available under conditions below; Entered signal is appropriate (Video, NTSC signal of S-video). Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.22 CF_CCAPTIONCOLOR Command Command "CF_CCAPTIONCOLOR_%1"[CR] %1 "COLOR" ------- Select Color "WHITE" -------- Select White Details Select color of Closed caption. The status set with this command is stored in EEPROM and its setting is effective even after ALL is OFF. This command is available in normal Power ON status. Note)Closed caption is available under conditions below; Entered signal is appropriate (Video, NTSC signal of S-video). Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 40/72