Sanyo PDG-DXL2000 RS232C Expand - Page 39

PDG-DXL2000 Expand Serial Command Functional Specifications 8.10.13 CF_LOGO Command Command "CF_LOGO_%1_%2"[CR] %1 "0000"-"9999 Set LOGO PIN CODE directly "OFF Disable Logo function "DFLT Display Default Logo %2 "USER Display Captured Logo "UP The same operation as pressing Up key or Left key "DN Set / Cancel Logo The value set by this command is stored in EEPROM and its setting is effective even after ALL is OFF This command is available in normal Power ON status. %1--- Set LOGO PIN CODE Details - When LOGO LOCK is in operation PIN CODE is correct Command is valid (Acceptable) PIN CODE is incorrect Command is invalid (Error Code "102") PIN CODE is out of %1 range ------ Command is invalid (Error Code "? ") -When LOGO LOCK is not in operation PIN CODE is within %1 range ------ Command is valid PIN CODE is out of %1 range ------ Command is invalid (Error Code "? ") Note) Receiving correct LOGO PIN CODE while LOGO LOCK is in operation enables to change LOGO setting, but it does not release LOGO LOCK. (LOGO LOCK continues.) Response Projector returns Error Code "101" by receiving USER in %2 when capture has not operated. Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.14 CF_ HDMI SETUP Command Command "CF_ HDMI SETUP _%1"[CR] %1 "NORMAL Select Normal mode "ENHANCED Select Enhanced mode Details Select image mode of HDMI setup. The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.15 CF_HDMI SOUND Command Command "CF_HDMI SOUND_%1"[CR] %1 "HDMI Select PCM sound (Digital sound) "EXTERNAL Select External sound input Details Select sound mode of HDMI setup. The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 38/72