Sanyo PLC-HF15000L RS232 Basic - Page 17

PLC-HF15000L Basic Serial Command Functional Specifications "10" [CR] Status: Power Failure When the power supply voltage inside the projector reaches abnormal level, the status automatically moves to Power OFF. Abnormal power supply voltage includes; Filter abnormal status Shutter abnormal status The projector returns "10" [CR], which indicates the status moves to Power OFF due to power failure. Fan also stops. "28" [CR] Status: Cooling Down due to Abnormal Temperature in process. When the internal temperature rises abnormally, it automatically starts Cooling Down process. Response value for this status is "28" [CR]. Even if the temperature comes down during this process, the given Cooling Down process is executed and it moves to Standby status. "24" [CR] Status: Power Management Cooling Down in process. When Power Management function in setting menu is set to ON, continuous 5 minutes of no signal status leads to turning off lamps and starting Cooling Down operation (Green LED on the projector body is turned off). During this period, any Functional Execution Command cannot be accepted. The Power Management Cooling Down operation continues about 90 seconds, then the status moves to Power Management. Status: No signal Response: "00" Power Management Cooling Down "24" Power Management "04" 5 minutes of no signal status After about 90 sec. "04" [CR] Status: Power Management This indicates it has moved to Power Management status according to the setting of Power Management function in Setting menu. "21" [CR] Status: Cooling Down in process after turned off due to lamp failure When a projector is turned off because of lamp failure, it automatically starts Cooling Down operation, in which the projector returns "21" [CR]. 17/23