Sanyo PLC-HF15000L RS232 Basic - Page 21

PLC-HF15000L Basic Serial Command Functional Specifications 8 Command with Address Specification 8.1 Overview - Commands with address are used to control more than one projector remotely through RS-232C by a single computer. - The command with address is defined as a single command per line that starts with "A" and ends with carriage return (0x0D). - When a projector receives carriage return (0x0D), it starts decoding. - The address such as "A001" is prefixed to the Basic Serial Command or Expand Serial Command already mentioned. e.g.) Functional Execution Command: "A001C05" [CR] e.g.) Status Read Command: "A001CR0" [CR] - Projector has the function to set up its own address in Service mode. Initial setting is "No. 001" Available range of the value is "001" to "999" - It clears the data in the receive buffer under following conditions. When receiving LF (0x0A) or EOF (0x1A). When it takes more than one second to receive a single command. (Until receiving a carriage return after the reception of the first data.) - It returns the response within 60ms. 21/23