Sanyo PLC-HF15000L RS232 Basic - Page 19

PLC-HF15000L Basic Serial Command Functional Specifications 7.4 Input Mode Read Command COMMAND "CR1" [CR] Detail Get currently selected SLOT Acceptable "%1" [CR] Response "1" = Input 1 is selected "2" = Input 2 is selected %1 "3" = Input 3 is selected "4" = Input 4 is selected (In the case SLOT method, SLOT 1~4 is selected.) Unacceptable "?" [CR] 7.5 Lamp Time Read Command COMMAND "CR3" [CR] Detail Get total lamp running hours Acceptable "%1_%2" [CR] Response %1, %2 Each lamp data follows in sequence with one space between each of them. %1 = lamp No.1 %2 = lamp No.2 ex; "00410_00410" [CR] Lamp No.1 = 410 Hours Lamp No.2 = 410 Hours Unacceptable "?" [CR] 7.6 Setting Read Command COMMAND "CR4" [CR] Detail Get screen setting status of Ceiling/Rear. Acceptable "%1" [CR] Response "11" [CR] = Normal Screen Setting "10" [CR] = Picture is top/bottom reversed %1 (Status: Rear & Ceiling ON) "01" [CR] = Picture is left/right reversed (Status: Rear ON) "00" [CR] = Picture is top/bottom and left/right reversed (Status: Ceiling ON) Unacceptable "?" [CR] 19/23