Sanyo PLC-XP100L Owners Manual - Page 16
Remote Control Code, To initialize the remote control code, slide the RESET
UPC - 086483068263
View all Sanyo PLC-XP100L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Part Names and Functions Remote Control Code The eight different remote control codes (Code 1-Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See "Remote control" in the Setting Menu on page 51. 1 Press and hold the MENU and a number button (1-8) for more than five seconds to switch between the codes. 2 To initialize the remote control code, slide the RESET/ ON/ALL-OFF switch to "RESET," and then to "ON." The initial code is set to Code 1. MENU button Number buttons RESET/ON/ALL OFF Switch Press and hold the MENU and a number button (1-8) that corresponds to the remote control code for more than five seconds to switch between the codes. 16