Sanyo PLC XU115 Instruction Manual, PLC-XU115 Network Set Up - Page 61
Trap option setting, Trap option
UPC - 086483071393
View all Sanyo PLC XU115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
SNMP setting Trap option Trap option setting Tick the check boxes in front of the condition item to send the trap. ✐ Click Set button if you tick or un-tick the check box on a page. [1 o When PJ lamp is off. o When PJ lamp replacement time is reached. o When internal PJ power circuit is failed. o When internal PJ temperature is too high. [2 o When PJ is turned into Standby in proper user operation. o When accumulated filter use time reaches [ ] hours. o When Power management function turns PJ lamp off. [3 o When the signal is interrupted. o When Auto Play is failed. o When lamp Corres. Value reaches [ ] hours. ✐ Up to 99,999 hours can be set for the time setting. ✐ If condition "When Auto Play is failed" is checked, the trap is sent when the error occurs during the auto display operation using with the network viewer function (+p.109). For further information of the error, refer to item "Auto Display setting and control page [3]"((+p.123). 61