Sanyo PLC XU115 Instruction Manual, PLC-XU115 Network Set Up - Page 70
PC adjustment, PC Adj.
UPC - 086483071393
View all Sanyo PLC XU115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Chapter 7 Controlling the projector PC adjustment Click PC Adj. on the main menu. This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Item Description Current mode...........Displays a current mode like VGA, SVGA, XGA, SXGA, UXGA, WXGA, etc. or MODE1 - MODE5 are the customized mode created by using the "Mode Store" function described below. Auto PC adj Performs automatic adjustment. Fine sync Performs Fine Sync adjustment. Total dots Adjust the number of total dots in the horizontal period. Clamp Adjusts the phase of the clamp. Display area Horizontal Adjusts the image area horizontally. Vertical Adjusts the image area vertically. Item Description Position Horizontal Adjusts the horizontal position of the screen. Vertical Adjusts the vertical position of the screen. Reset Resets the PC adjustments to the previous levels. Mode Store Stores the PC adjustment values. Select a mode no. [Mode1 - Mode5] from the pull-down menu. Mode Free Clear the PC adjustment values. Select a mode no. [Mode1 - Mode5] from the pull-down menu. 70