Sanyo PLC XU115 Instruction Manual, PLC-XU115 Network Set Up - Page 95
Settings before using the Network Communication, 1] When serving the capture data to all the sub - specifications
UPC - 086483071393
View all Sanyo PLC XU115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Using the Network Communication Settings before using the Network Communication To use the Network Communication, the capture setting of the projector must be set either [1] or [2] as described below. [1] Projector searches all the available subject computers in the network automatically. or [2] S ubject computers are registered to the projector. Perform capture setting following to the description below. [1] When serving the capture data to all the subject computers in the network. By using the web browser, display "Communication Setting" from menu "Network"-"Capture"-"Page 2". Confirm that the item Auto search subject PC is "ON". If "OFF", change mode to "ON". * Projector can find up to 30 computers in the network. [2] When serving the capture data to the specific subject computers in the network. Set the item Auto search subject PC "OFF" described in the above and then display "Connection Setting" from menu "Network"-"Capture"-"Page 3" with the web browser. Enter the IP address of subject computer and click Set button to register. * Up to 30 computers can be registered to the projector. ✐To display the served capture data, the software Network Capture 5 must be installed on the computer. 95