Sanyo PLC XU115 Instruction Manual, PLC-XU115 - Page 41
Input Source Selection (Component, RGB Scart 1-pin
UPC - 086483071393
View all Sanyo PLC XU115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Video Input Input Source Selection (Component, RGB Scart 1-pin) Direct Operation Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. Top Control INPUT button Computer 1 (Analog) Computer 1 (Digital) Computer Video wired Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point ◄►buttons to move the red frame pointer to the Input Menu icon. Use the Point ▲▼ buttons to move the red arrow pointer to Computer 2 and then press the SELECT button. After the Source Select Menu appeared for Computer 2, move the pointer to Component or RGB(Scart) and then press the SELECT button. Remote Control wireless COMPUTER button Computer 1 (Analog) Input Menu Computer 1 (Digital) Computer Input Menu icon Component When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a Component-VGA Cable, select Component. RGB (Scart) When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a ScartVGA Cable, select RGB (Scart). Note: • Wired and Wireless are for the Network function. See owner's manual "Network Set-up and Operation" . • When the Input Search function is set to "On1" or "On2", the input signal will be searched automatically (p.51). Move the pointer (red arrow) to Computer 2 and press the SELECT button. Computer Source Select Menu Move the pointer to Component or RGB(Scart) and press the SELECT button. 1