Sanyo PLC XU115 Instruction Manual, PLC-XU115 - Page 45
Gamma, Sharpness, Progressive, Noise reduction, Notes, Reset, Store, Image Select Menu
UPC - 086483071393
View all Sanyo PLC XU115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Video Input Sharpness Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15). Gamma Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Noise reduction Noise interference on the screen can be reduced. Select one of the following options to get smoother images. Off.......... Disabled. L1........... Lower reduction L2........... Higher reduction Progressive An interlaced video signal can be displayed in progressive mode. Select one of the following options. Off.......... Disabled. L1........... For an active picture. L2........... For a still picture. Film........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Store To store the adjusted data, select Store and press the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select [Yes]. Stored data can be called up by selecting an "Image (1-4)" in the Image Select Menu on page 43. Quit Exit the Image Adjust Menu. Notes: • Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected (p.42). • Reset and Store icons will be displayed when any adjustment is made. Store icon Image Mode Menu Move the red frame pointer to an image item to be set and then press the SELECT button. A confirmation box appears and then select [Yes]. 45