Sanyo PLV Z1 Owners Manual - Page 15
Installation - lamp life
UPC - 086483045776
View all Sanyo PLV Z1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installation Positioning the Projector G This projector is designed to project on a flat projection surface. G The projector can be focused from 3.6'(1.1m) ~ 19.7'(6.0m). G Refer to the figure below to adjust a screen size. *The lens is at the top of the lens shift. ROOM LIGHT The brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide the best image. 19.7'(6.0m) 14.8' (4.5m) 9.8' (3.0m) 3.9'(1.2m) 100" 40" 83" 200" 150" Max. Zoom 169" 125" Min. Zoom H Screen Size (W x H) mm Zoom (min) Zoom (max) 31" 30" 663 x 373 3.6'(1.1m) ----- 40" 884 x 497 4.6' (1.4m) 3.9' (1.2m) 100" 2209 x 1244 11.8' (3.6m) 9.8' (3.0m) 150" 3314 x 1866 17.7' (5.4m) 14.8' (4.5m) 200" 4419 x 2489 ----- 19.7'(6.0m) Tilting the Projector Picture tilt and projection angle can be adjusted by rotating the Adjustable feet. Projection angle can be adjusted up to 11.8 degrees with the Adjustable feet. 1 Lift the front of the projector and pull the Feet lock latches on both sides of the projector. 2 Release the Feet lock latches to lock the Adjustable feet and rotate the Adjustable feet to adjust position and tilt. 3 To retract the Adjustable feet, lift the front of the projector and pull and undo the Feet lock latches. Keystone distortion of a projected image can be adjusted by menu operation or the remote control. (Refer to page 21 and 42.) ADJUSTABLE FEET CAUTION Tilt the projector within the adjustable range in order not to shorten the life of the lamp. Proper angle should be taken. Refer to page 5. FEET LOCK LATCH 15