Sanyo PLV Z1 Owners Manual - Page 37

Computer Input Display area Select the area displayed with this projector. Select the resolution at the Display area dialog box. NOTE : The Display area, Display area (H/V) and Full screen cannot be adjusted when "1035i (HDTV)" or "1080i (HDTV)" is selected in the Computer System Selection menu (p32). Display area Press the POINT RIGHT button at the Display area and the Display area dialog box appears. Display area H Adjustment of horizontal area displayed with this projector. Press the POINT LEFT/RIGHT button to decrease/increase value to match the resolution of image. Display area V Adjustment of vertical area displayed with this projector. Press the POINT LEFT/RIGHT button to decrease/increase value to match the resolution of image. Full screen When this function is on, SXGA image is fully displayed at 4 : 3 aspect ratio. It is displayed at 5 : 4 aspect ratio with this function off. NOTE : The Full screen cannot be selected after the Display area, Display area H, and Display area V are adjusted. Reset Reset all adjustment before the data is stored. (The Reset does not work for the stored data.) Mode free To clear the adjustment parameters previously set, select the Mode free and press the POINT RIGHT button. Choose the mode that you want to clear, and then press the SELECT button. Store To store the adjustment parameters, select the Store and press the POINT RIGHT button. Choose one of the Mode 1 to 5, and press the SELECT button. Quit Close the Computer Adjustment menu. 37