Sanyo PLV Z1 Owners Manual - Page 32

Computer Input Computer System Selection This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, or SXGA in most cases (refer to "Compatible Computer System" on the next page). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting. The projector displays one of the Auto, - - -, Mode 1/2/3/4/5, or the system provided in the projector. Auto When the projector cannot recognize the connected system as computer system provided in this projector, Auto PC Adjustment function operates to adjust the projector and the message "Auto" is displayed on the System box. (Refer to p34.) Store the adjusted data by the Auto PC Adjustment function so as to use the system again. When the image is not provided properly, manual adjustment is required. (Refer to page 35, 36, and 37.) Computer System Selection menu The System box displays the system being selected. - - - There is no signal input from the connected computer. Make sure the connection of the computer and the projector is set correctly. (Refer to the Troubleshooting section on page 47.) Mode 1 User preset adjustment in Computer Adjustment (Manual). Adjustment data can be stored Mode 1 - 5. SVGA 1 Computer systems provided in the projector. The projector chooses proper system and displays it. *Mode 1 and SVGA 1 are examples. 1 Press the MENU button, and the main menu appears. Select the Computer System Selection menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu. Custom Mode (1~5) set in the Computer Adjustment menu. (p35-37) Computer System Selection menu Computer System Selection menu 2 Choose the system that you want to select with the POINT UP/DOWN button, and then press the SELECT button to activate the item. Selected System The systems displayed on the on-screen menu can be selected. 32 Close the Computer System Selection menu.