Sanyo PLV Z1 Owners Manual - Page 36
Fine sync, Total dots, Horizontal, Vertical, Current mode, Clamp
UPC - 086483045776
View all Sanyo PLV Z1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Computer Input 4 Choose one of the positions from the Mode 1 to 5 where you want to store with the POINT UP/DOWN button, and press the SELECT button. Select "Yes" with the SELECT button and close the menu by pressing the SELECT button at the Quit. To store adjustment data. Vacant Mode This Mode has parameters being stored. 5 To clear the adjustment parameters previously set, select the Mode free with the POINT UP/DOWN button and press the POINT RIGHT button. Choose the mode that you want to clear with the POINT UP/DOWN button, and then press the SELECT button. Select "Yes" with the SELECT button and close the menu by pressing the SELECT button at the Quit. To clear adjustment data. The items that you can adjust are the following: Shows values of "Total dots," Quit "Horizontal," "Vertical," "Display area H," and "Display area V." Fine sync Adjust an image as necessary to eliminate flicker from the display. Press the POINT LEFT/RIGHT button to adjust value.(From 0 to 31.) Total dots The number of total dots in one horizontal period. Press the POINT LEFT/RIGHT button and adjust number to match your computer image. Horizontal Adjust horizontal picture position. Press the POINT LEFT/RIGHT button to adjust the position. Vertical Adjust vertical picture position. Press the POINT LEFT/RIGHT button to adjust the position. Current mode Press the POINT RIGHT button to show the information of the computer connected. Current mode Clamp Adjust clamp level. When the image has a dark bar(s), try this adjustment. Press the POINT RIGHT button at the Current mode icon to show the information of the computer connected. 36