Sanyo PLV Z1 Owners Manual - Page 21

Basic Operation Keystone Adjustment If a projected picture has keystone distortion, correct the image with Keystone Adjustment. 1 Press the KEYSTONE L/M button on the remote control or select the Keystone in the Setting menu. (Refer to page 42.) The Keystone dialog box appears. 2 Correct keystone distortion by pressing the KEYSTONE L/M button or the POINT UP/DOWN button. Press the KEYSTONE L button or the POINT UP button to reduce the upper part of image, and press the KEYSTONE M button or the POINT DOWN button to reduce the lower part. • The arrows are white when there is no correction. • The arrow disappears at the maximum correction. • The direction of the arrow being corrected turns purple. Reduce the upper width with the KEYSTONE L button or the POINT UP button. Reduce the lower width with the KEYSTONE M button or the POINT DOWN button. Keystone Adjustment Hint Use the Lens shift function first to move the screen for the quality of image before using the Keystone adjustment function. Moving the screen with the Lens shift function produces a better image than keystone adjustment function. No Show Function Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. No show Message disappears after 4 seconds. 21