Sanyo VCC-HD4600 VCC-HD4600 Manual - Page 88
In [TERMINAL], select the video connector you want to use.
UPC - 086483075704
View all Sanyo VCC-HD4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
1 In [MIC SENSITIVITY], specify the microphone sensitivity. Select the sensitivity of the microphone connected to the camera from 8 levels. +4, +3, +2, +1, 0, -1, -2, -3 2 In [FILTER(500Hz)], enable or disable the audio filter. The audio filter reduces the 500 Hz or less frequency components of the audio. A filter option with a lower negative dB value produces larger effects. ON(-3dB), ON(-6dB), OFF 3 In [OUTPUT LEVEL], select the desired audio output level and click SET . Here, you specify the gain value of the audio output amplifier from the following 4 levels. +2, +1, 0, -1 Configure the video output terminal to use. You cannot output video signal from the HDMI connector and the MONITOR OUT connector at the same time. 1 In [TERMINAL], select the video connector you want to use. AUTO: A connected connector is detected automatically. HDMI, MONITOR OUT If both the HDMI and the MONITOR OUT connectors are connected in "AUTO" mode, the HDMI connector takes precedence. 2 In [SIGNAL FORMAT], select the video size. VCC-HD4600: 1080i, 720p, 480p VCC-HD4600P: 1080i, 720p, 576p You can select [SIGNAL FORMAT] only when "HDMI" is set for [TERMINAL]. Working with Administrator Configuration Screens 18/71