Sanyo VCC-HD5600 VCC-HD5600 Setup and Summary Manual - Page 13

Specifications Camera Unit (VCC-MCH5600/MCH5600P) Image pickup device 1/2.5" CMOS sensor Effective pixels 16:9 1920 (H) × 1080 (V), 4:3 1600 (H) × 1200 (V) Lowest image illumination 50IRE: 2.0 lx (F1.8, in color mode with high gain) 50IRE: 0.1 lx (F1.8 in black-and-white mode with high gain) Video S/N ratio 50 dB or higher (when AGC is 'Off') Lens Focal Length: 6.3 to 63 mm, F number: F1.8 - 2.5 Optical zoom 10x, electronic zoom 16x (up to 160x when used in combination with the optical zoom) Rotational scope Pan: 360° endless pan Tilt: -20 to +200° Rotation speed Pan: Max 420°/sec Tilt: Max 360°/sec (0.1 to 120°/sec during manual operation) Preset position Max 255 Auto mode Sequential, auto pan, tour, automatic return Privacy mask ON/OFF, up to 32 positions Motion sensor ON (detection area setting, video analytics)/OFF, face detection function Auto pursuit ON/OFF Sway compensation ON/OFF Language selection English, French, German, Spanish, Japanese For further details on the specifications of the camera, refer to the electronic manual. Power unit (VA-94S) ■ I/O Video output Monitor output terminal (BNC) LAN 10BASE-T/100BASE-TX (RJ-45 connector) EX-HDD Connector For connecting SANYO-specified external hard disk case (VA-HDC4000) SD Card Slot 1 (SDHC compliant, max. 32 GB supported) Alarm input 8 (NO/NC), also serving as Day/Night switching terminal Alarm output 2 (NO/NC switching, 16 V, 150 mA, open collector) Audio input/output Audio input (white: 3.5-mm mini jack) Audio output (black: 3.5-mm mini jack) Communication method RS-485 Protocol SSP, PELCO-D Baud rate 2400, 4800, 9600, 19200 Address 1 - 255 (Sanyo SSP: 1 - 127) • HDMI output: Possible when an HDMI option board (VA-HDB90; sold separately) is attached ■ Power source Operating ambient temperature/humidity Power source Power consumption -10 to +50°C/14 to 122°F 90% RH or less (no condensation) 24 VAC±10%, 50/60 Hz 29 W 12