Sanyo VCC-HD5600 VCC-HD5600 Setup and Summary Manual - Page 3
Name and Function of Each Component
View all Sanyo VCC-HD5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Name and Function of Each Component This device is composed of a camera unit and power unit (VA-94S). ᶅ ᶄᶃ ⡣ ⡤ ᶊ ᶆ ᶈ ᶇ ᶉ ᶃ Connection Point This is the connection point between the camera unit and the power unit. ᶄ Interface Board (accessories) ⦇ Control switch (transmission rate and protocol setting, etc.) ⦈ Address switch (control camera address setting) ⦇ ⦉ ⦉ Control terminal (connection of controller and alarm input/output cable) ⦈ ᶅ LAN/EX-HDD Terminal ⡣LAN terminal (RJ-45 type): Use this socket to connect the camera to your PC to enable network operation. ⡤EX-HDD terminal (USB type): When recording live video onto an external hard disk, put the hard disk in a dedicated hard disk case (VA-HDC4000; sold separately) and then connect the case to the camera. ᶆ SD Card Slot When recording live video onto an SD memory card, insert the card into the slot. ᶇ Power terminal Use this cable to connect a 24 VAC power supply. There is no power indicator on the camera. ᶈ Audio output terminal (black: 3.5-mm mini jack) Connect this jack via an audio cable to the audio input jack of an amplified speaker system or the monitor. ᶉ Audio input terminal (white: 3.5-mm mini jack) Use this jack to connect an external microphone to listen to the sound while monitoring the live video, or simultaneously record the video and sound. ᶊ Monitor output terminal (BNC type) This terminal is used for video output. Connect this terminal to a monitor, etc. By installing an HDMI option board (VA-HDB90; sold separately), the camera can be connected to a high vision monitor. 2