Sanyo VCC-HD5600 VCC-HD5600 Setup and Summary Manual - Page 5
Mounting the camera unit
View all Sanyo VCC-HD5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2. Mounting the camera unit ⵄ Fasten the camera unit safety wire (E) to the hook (F) on the inner side of the power board unit. ⵆ Align the colored dot (blue) on the camera unit with the arrow on the power board unit, and push the camera unit until they click. ⵈ Align the colored dot (blue) on the inside of the surface cover with the arrow on the power board unit, and turn the surface cover in the direction of the arrow to secure it in place. ■ How to attach the drop-prevention cable (accessory) ⁞ Peel off the two-sided tape (J) at the end of the cable, attach the cable end to the hook (K) on the inside of the surface cover as shown in the figure, and then pull the cable downward until the small protrusion (L) and the hook (K) fit in the cable's first and second holes from the top, respectively. Fasten the cable to the hook on the side of the power board unit. ⁞ L J K Installation F ⵄ E ⵆ ■ When routing cables through side face of power board unit ⵈ ■ To remove the camera unit Push Push Surface cover (Accessory) 4