Sanyo XL50 Instruction Manual, PLC-XL50 - Page 22

Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the top control or on the remote control to display the On-Screen Menu. 2 Use the Point 7 8 buttons to select a Menu icon; use the Point ed buttons to select an item. 3 Press the SELECT button to show the item data. To adjust the data, use the Point 7 8 buttons. Refer to the relevant pages for more details about each adjustment. To close the On-Screen Menu, press the MENU button again. Top Control / Remote Control ✔Note: •The selected item is not active until the SELECT button is pressed. SELECT button CEILING On-Screen Menu MENU button POINT buttons SELECT button MENU button POINT buttons Menu icon Menu bar Pointer (red frame) Press the Point ed buttons to move the pointer. Item SELECT button Pointer (red frame) 22 Press the SELECT button here to display previous items. Press the SELECT button here to display next items. Item data Press the Point 7 8 buttons to adjust the value. Quit Exit this menu.