Sanyo XL50 Instruction Manual, PLC-XL50 - Page 38
Input Source Selection (RGB Scart 21-pin), Top Control, Input Menu, Direct Operation, Menu Operation
![]() |
UPC - 086483069499
View all Sanyo XL50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Video Input Input Source Selection (RGB Scart 21-pin) Direct Operation Press the INPUT button on the top control or COMPUTER button on the remote control to select Computer 1. Before using INPUT or COMPUTER buttons, select the correct input source through Menu operation as described below. Top Control INPUT button INPUT button Video Computer 1 Computer 2* Menu Operation 1 Use the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Input Menu icon. 2 Use the Point ed buttons to move the red arrow pointer to Computer 1 and then press the SELECT button. 3 After the Source Select Menu appeared for Computer 1, move the pointer to RGB (Scart) and then press the SELECT button. RGB (Scart) When the input source is coming from video equipment connected to the COMPUTER IN 1 terminal with a Scart-VGA Cable (not supplied), select RGB (Scart). ✔Note: •Computer 2 is not displayed when the COMPUTER IN 2/ MONITOR OUT terminal is set as Monitor out (p.49). •Computer 2 (COMPUTER IN 2/MONITOR OUT) can accept only RGB signal. • W hen the Input Search function is set On1 or On2, the input signal will be searched automatically (p.49) Remote Control / COMPUTER button COMPUTER button Computer 1 Computer 2* *See Note at the bottom of this page. Input Menu Input Menu icon Move the pointer (red arrow) to Computer 1 and press the SELECT button. Computer 1 Source Select Menu Move the pointer to RGB (Scart) and press the SELECT button. 38
![](/manual_guide/products/sanyo-xl50-instruction-manual-plcxl50-cbf2954/38.png)