Sanyo XL50 Instruction Manual, PLC-XL50 - Page 57
Charge the built-in batteries, Replace the rechargeable batteries
UPC - 086483069499
View all Sanyo XL50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Antitheft Alarm Function Charge the built-in batteries Set the Battery charge option in the Alarm setting menu to "Auto." The default setting is "Auto." As long as the AC power cord is connected and this option is set to "Auto," the built-in battery for Alarm function is being charged at all times. While charging the battery, "Charging" is displayed in the menu. The "Charging" appears dimmed when the battery is fully charged or the Battery charge option is set to "Off," or if charging malfunction occurs. Set the option to "Off" when not using the Alarm function. This can save the power and battery life. Replace the rechargeable batteries Use only the specified battery for this projector. Using other types of battery may cause accident or fire hazard. Replacement Battery: SANYO Ni-MH BATTERY PACK Part No. 645 089 8587 How to replace the rechargeable batteries 1 Unplug the AC power cord from a wall outlet. 2 Set the Alarm function to "Off" (see page 55). If it is not released, the alarm will start ringing when you try to remove the rechargeable battery cover. 3 Remove the screw from the rechargeable battery cover and open the cover. 4 Pull out the battery connector and remove the battery. 5 Install new battery and plug the connector into the socket. Note: T he battery connector has polarity. Observe battery polarity when installing. 6 Put back the battery cover and secure it with the screw. Caution: Tighten the screw securely. If you fail to do so, the alarm will not operate. Do not use any other screws. This may cause damage to the projector. ✔Note: • The PIN code and settings you have changed are effective even after the battery is changed. •When replacing the rechargeable batteries, protect the infrared remote receiver with a soft cloth to avoid damaging it. •Unplug the battery connector if you carry your projector frequently and use the carrying case. If you do not unplug the battery connector, the alarm may be triggered when the Alarm buttons are accidentally pressed inside the carrying case.. Screw Remove the screw and open the battery cover. Install the battery, then put back the battery cover and secure it with the screw. 57