Sanyo XL50 Instruction Manual, PLC-XL50A - Page 26

Basic Operation / AUTO PC button Press the AUTO PC button to operate the Auto PC function. See page 24 for more details. D.ZOOM buttons Press the D.ZOOM buttons to zoom in and zoom out the images. See page 36 for more details. CEILING button Press the CEILING button to reverse the top/bottom and left/right of image (p49). NO SHOW button Press the NO SHOW button to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When the projected image is captured and is set as "User" in the Logo selection (p.47), the screen changes each time you press the NO SHOW button as follows. black out ➜ the captured image ➜ normal KEYSTONE button For details, see page 24. IMAGE button Press the IMAGE button to select an image level of the screen. See pages 32, 40 for more details. P-TIMER button Press the P-TIMER button. The timer display "00:00" appears on the screen and the timer starts to count time (00:00-59:59). To stop the P-Timer, press the P-TIMER button. Press the P‑TIMER button again, then the P-Timer display disappears. LAMP CONTROL button Press the LAMP CONTROL button to select the lamp mode to change the brightness of the screen. Normal ... Normal brightness Auto ...... Brightness according with the input signal Eco ...... Lower brightness reduces the lamp power consumption and extends the lamp life. Remote Control VOLUME +/buttons (See page 25.) AUTO PC button D.ZOOM buttons CEILING button NO SHOW button CEILING KEYSTONE button (See page 24.) POINT ed buttons IMAGE button P-TIMER button LAMP CONTROL button ✔Note: •See the previous page for the description of other buttons. "No show" disappears after 4 seconds. P-Timer display 26