Sanyo XL50 Instruction Manual, PLC-XL50A - Page 53

Setting Change the PIN code lock setting Select Off, On1, or On2 with the Point 7 8 buttons and then move the red frame pointer to "Quit" with the Point d button. Press the SELECT button to close the dialog box. Change the PIN code The PIN code can be changed to your desired four-digit number. Select "PIN code change" with the Point d button, and press the SELECT button to display the New PIN code input dialog box. Select a number by pressing the Point ed buttons. And then press the Point 8 button to fix the number and move the pointer. Repeat it to complete entering a fourdigit number. After entering the four-digit number, move the pointer to "Set" by pressing the Point 8 button. Then press the SELECT button. caution: when you have changed THE PIn code, write down the new pin code in column of the pin code no. memo on page 74, and keep it securely. If you forget your PIN code, the projector can no longer be started. Fan This function provides the following options in the cooling fans' operation after turning off the projector (p.21). L1 ...... Normal operation L2 ...... Slower and lower-sound than the normal operation (L1), but it takes longer to cool down the projector. Standby mode This function is used to change the setting of standby electricity. Eco...... Standby electricity becomes small. The projector's network function will stop when controlling the projector with RS-232C. Serial... Standby electricity becomes large. Change the PIN code lock setting Select a desired setting with the Point 7 8 buttons. Change the PIN code Select PIN code change and press the SELECT button. The New PIN code input dialog box appears. The input numbers are being displayed for confirmation. ✔Note: • When "Eco" is selected, it is only possible to turn on the projector while using the RS-232C serial port. 53