Sanyo XL50 Instruction Manual, PLC-XL50A - Page 66
Indicators, The projector is detecting abnormal condition., LAMP REPLACE
![]() |
UPC - 086483069499
View all Sanyo XL50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Appendix The projector is detecting abnormal condition. Indicators POWER red/green WARNING TEMP. red WARNING FILTER orange LAMP REPLACE yellow Projector Condition The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and ✽ ✽ the temperature returns to normal, the POWER indicator lights red and the projector can be turned on. (The WARNING indicator keeps red blinking.) Check and clean the air filters. The projector has been cooled down enough and the temperature ✽ ✽ returns to normal. When turning on the projector, the WARNING red indicator stops blinking. Check and clean the air filters. The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If ✽ ✽ the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. ✽ ✽ The Filter counter reached a set time. Clean or replace the filter as soon as possible. LAMP REPLACE When the projection lamp reaches the end of its life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after replacing the lamp. See pages 58-59. 66
![](/manual_guide/products/sanyo-xl50-instruction-manual-plcxl50a-24d03c6/66.png)