Sanyo XL50 Instruction Manual, PLC-XL50A - Page 37

Video Input Input Source Selection (Video, S-Video, Component) Direct Operation Press the INPUT button on the top control or VIDEO button on the remote control to select "Video." Before using the INPUT or VIDEO buttons, select the correct input source through menu operation as described below. Top Control INPUT button INPUT button Video Computer 1 Menu Operation 1 Use the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Input Menu icon. 2 Use the Point ed buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu . 3 Move the pointer to the desired source and then press the SELECT button. Auto When selecting "Auto," the projector automatically detects the incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1. Component 2. S-Video 3. Video Video When the video input signal is connected to the VIDEO jack, select Video. S-Video When the video input signal is connected to the S-VIDEO jack, select S-Video. Component When the input source is coming from video equipment connected to the COMPONENT IN terminal with a Component Cable (not supplied), select Component. Computer 2* Remote Control / VIDEO button Input Menu icon Input Menu VIDEO Move the pointer to Video and press the SELECT button. Source Select Menu (VIDEO) Move the pointer to the desired source and press the SELECT button. ✔Note: •Computer 2 is not displayed when the COMPUTER IN 2/ MONITOR OUT terminal is set as Monitor out (p.49). • W hen the Input Search function is set On1 or On2, the input signal will be searched automatically (p.49) 37