Schwinn 250 Recumbent Bike Assembly and Owner's Manual - Page 39
Pausing or Stopping
View all Schwinn 250 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
You can push STOP to stop the Results display and go back to Power-Up Mode. If there is no RPM or HR signal, the Console automatically goes into Sleep Mode. Pausing or Stopping The Console will go into Pause Mode if the user stops pedaling and pushes STOP during a workout, or there is no RPM signal for 5 seconds (user not pedaling). The Console display shows WORKOUT PAUSED, and after 4 seconds the current workout data starts to scroll automatically (the same format as Results Mode). You can use the Increase/Decrease buttons to move through the results manually. 1. Stop pedaling and push the STOP button to pause your workout. 2. To continue your workout, push START/ENTER or start pedaling. To stop the workout, push the STOP button. The Console will go into Results / Cool Down mode. 39