Schwinn 425 Elliptical Assembly and Owner's Manual - Page 5

Maximum User Weight: 300 lbs. (136 kg) Power Requirements: Operational Voltage: 9VDC Operating Current: 1500 mA Regulatory Approvals: AC Power Adapter: UL listed, CSA certified (or equivalent), Rated 120V 60Hz Input, 9VDC, 1500mA Output. Class 2 or LPS. SPECIFICATIONS 67.7" (171.9 cm) 61.5" (156.2 cm) 25.8" (65.6 cm) This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is provided in accordance with California's Proposition 65. If you would like additional information, please refer to our website at www.nautilus.com/prop65. Before Assembly Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 74" x 130" (1.9 m x 3.3m). Basic Assembly Tips Follow these basic points when you assemble your machine: 1. Read and understand the "Important Safety Instructions" before assembly. 2. Collect all the pieces necessary for each assembly step. 3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counter- clockwise) to loosen, unless instructed otherwise. 4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes. 5. The assembly requires 2 people. Note: Some axles contain oil. Use caution to avoid staining clothes or carpet. 5